Samsung SHR-3040P manual Motion Setup, Alarm Setup, To set the motion area

Page 32

setup

Motion Setup

You can specify an area to detect a motion.

If you select an area to detect a motion, the DVR will detect any motion occurring in that area.

See the previous section to repeat steps 1~3. (Page 30)

4.Use the up/down (▲▼) button to select <MOTION SETUP>, and press [OK].

The “MOTION SETUP” screen appears.

CONFIGURATION

HDD MANAGEMENT

CAMERA SETUP

MOTION SETUP

ALARM SETUP

INTERVAL SETUP

DATE/TIME SETUP

PASSWORD SETUP

BUZZER SETUP

ESC

5. Use the up/down (▲▼) button to move to a desired item.

• CHANNEL: Select a channel to set the motion detection.

• SENSITIVITY: Adjust the sensitivity of the motion detection.

• DURATION: Set the recording duration from the moment a motion is

MOTION SETUP

CHANNEL

CH1

SENSITIVITY

6

DURATION

detected. You can specify the duration between 2 and 99 seconds.

• SIZE: Specify the number of cells to be selected at once.

Ex) If you select 3, a total of 9 cells (3X3) will be selected.

SIZE

05

2

6. Use the four direction (▲▼◄ ►) buttons and press [OK]

 

 

OK

DEFAULT

ALL-DEFAULT

ESC

to set the motion area.

 

 

 

Motion detection is activated for the area that is selected in red.

 

 

 

By default, all cells are set to disabled.

If you use the cursor to set the motion area, select a cell and set it to ‘ACTIVE/INACTIVE’. Left-click a cell and drag it until a desired cell block is shaped.

When a desired block is selected, release the left button of the mouse.

7.When done, select <OK>. Your setting will be applied.

If you select <DEFAULT>, the selected channel will be reset to the default, and if selecting <ALL-DEFAULT>, all the channels will be reset to the factory default.

8.To return to the previous menu, select <ESC>.

Alarm Setup

You can set the input system of the alarm that is connected to the DVR.

See the previous section to repeat steps 1~3. (Page 30)

4.Use the up/down (▲▼) button to select <ALARM SETUP>, and press [OK].

The “ALARM SETUP” screen appears.

CONFIGURATION

HDD MANAGEMENT

CAMERA SETUP

MOTION SETUP

ALARM SETUP

INTERVAL SETUP

DATE/TIME SETUP

PASSWORD SETUP

BUZZER SETUP

ESC

32_ setup

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Channel DVR KEY Features 2X Zoom Overview Important Safety InstructionsStandards Approvals Battery Before StartRemote Control/Battery AAAX2 Installation CD User’s ManualWhat’s Included DVRContents What is Web Viewer? Client SetupRemote Setup Appearance & DimensionFront Panel Rear Panel Remote Control AT a Glance AudioChecking the Installation Environment  The rack installation is available only in shelf typeInstalling HDD Connecting to RS-485, alarm Connecting to a Different DeviceConnecting to video, audio, and monitor Network Connection USB ConnectionLogin Connect the power cable of the DVR to the wall outletLive Getting StartedFull Live Screen ConfigurationHDD Auto View the Launcher Menu ZoomSplit Screen Single Screen of CH Mode SwitchPIP Display Zoom Auto SequenceFreeze CH4 CH1Record PTZSearch Percent SearchDate/Time Search Search menu appearsEvent Search PlayEvent Search To set the event update Specify a time in Main Menu ConfigurationInterval Setup Event Update Event MonitoringSpot Setup Event Monitoring on the Spot MonitorUsing the Menu Using the mouseUsing the buttons on the remote control or the front panel  SetupDisplay Setup VGA SetupDisplay Setup VGA SetupScreen Display Setup OSD SetupRecord Setup OSD SetupRecord Setup Quality Select the quality from Highest, High and Normal Schedule Setup SETUP, and press OK Schedule Setup screen appears Schedule SetupConfiguration ConfigurationHDD Management HDD ManagementChannel Select a channel to change the title Camera SetupCamera Setup Motion Setup Alarm Setup By default, all cells are set to disabled Motion SetupInterval Setup SetupAlarm Setup Auto sequence interval for each camera channelDATE/TIME Setup Date/Time SetupPassword Setup Buzzer Setup User ID Select a user IDKEY Tone Set the key tone of the button OccursTCP/IP Setup IP SetupTCP/IP Setup External DeviceDdns Setup What is DDNS?IP Setup Ddns SetupPTZ Setup Command SetupPTZ Setup Command SetupSpeed Setup Speed SetupSpecify the Sensitivity Mouse SetupMouse Setup Audio Setup Spot SetupAdjust the I/O volume Audio SetupBackup BackupYou can backup HDD recording data on a USB storage device Event Popup Duration Specify the event popupSize is Larger than Free Space System MessagesFile System is not Supported Firmware Upgrade UpgradeYou can upgrade the DVR fi rmware with the latest version Firmware UpgradeChanging Factory Default Factory DefaultFactory Default Load Setup Select Load SetupLanguage You can select a language to your preferenceNetwork Connection and Settings ConnectionIf you are not using a router for network connection Static IP ModeDynamic IP Dhcp Mode Set Dhcp Mode to Manual in Main MenuIf using a router Using DVR Static IPDVR Network Router Dhcp IP AddressPort Forwarding with IP/Port Router Port Forwarding of Web Server Port RouterWhat is WEB VIEWER? Connecting to the WEB ViewerSystem Requirements  WEB ViewerWEB Viewer AT a Glance Client Setup Web Viewer SetupUpdate To register a web siteTo return to the Web Viewer screen, click Close Remote SetupBuzzer You can set the recording quality Refer to Record SETUP. You can set the recording schedule Refer to Schedule SETUP.Record Configuration Record SchedulePlayer Player at a Glance Image Edit Edit ToolRemote Viewer When done, the ‘C WEBBACKUP’ folder will openAudio signal will not be saved with AVI Save You can select Single screen or 4-split mode Remote Viewer at a GlancePTZ Control DVRSetup  Only the admin user account can access the Setup menuEvent  Appendix Product SpecificationUSB 20% to 85% RH Ddns20C ~ +60C -4F ~ +140F Appearance & Dimension 258 247 371Troubleshooting FAQ Audio Setup Correct disposal of batteries in this product
Top Page Image Contents