Samsung SHR-3040P manual Ddns Setup, What is DDNS?, Checking the Ddns Address, IP Setup

Page 37

6.Use the up/down (▲▼) button to move to a desired item.

•MAC ADDRESS: Shows information of the network that is assigned to the DVR.

•DHCP MODE: If you set this to <AUTO>, IP address and other network settings will be assigned from the DHCP server. (Only the IP port can be set manually)

If you set this to <MANUAL>, you can specify all of the settings below:

•IP PORT, IP ADDRESS, GATEWAY, SUBNET: Manually enter the value according to the network environment if you set the DHCP Setup to Manual.

7.When done, select <OK>. Your setting will be applied.

8.To return to the previous menu, select <ESC>.

	IP SETUP
MAC ADDRESS	00-0A-A2-08-08-F3
DHCP MODE		MANUAL
		IP DETECT
IP PORT		50000
IP ADDRESS	192.168.001.160
GATEWAY	192.168.001.001
SUBNET	255.255.255.000
BANDWIDTH	HIGH	(1.5Mbps↑)
WEB SERVER PORT		00080
		OK

ESC

 SETUP

DDNS Setup

You can specify a DDNS site to access when a remote user connects to the network.

What is DDNS?

DDNS is an acronym for Dynamic DNS(Domain Name System).

DNS(Domain Name System) is a domain service to redirect the IP address (ex: 64.233.189.104) to a

name that the user can remember with ease (ex: www.google.com).

DDNS(Dynamic DNS) is the IP registration service that registers a domain name that the user remembers and a changed IP address with the DDNS server so that the user can redirect to the registered domain name if the previous IP address is changed in a dynamic IP environment.

Checking the DDNS Address

A DDNS address consists of <English lower case “g”> + <MAC address 6 digits from the end> + <websamsung.net>.

Ex) If 6 digits of the MAC address of the DVR are <00:00:f0> from the end: g + 0000f0 + websamsung.net = g0000f0.websamsung.net

See the previous section to repeat steps 1~4. (Page 36)

5.Use the up/down (▲▼) button to select <DDNS SETUP>, and press [OK].

The “DDNS SETUP” screen appears.

6.Use the up/down (▲▼) button to move to a desired item.

•DDNS ENABLE: Set whether to use the DDNS.

•DDNS STATUS: If you set DDNS Enable to <ON>, you will see a message of the status of the DDNS on the screen.

7.When done, select <OK>. Your setting will be applied.

8.To return to the previous menu, select <ESC>.

	DDNS SETUP
DDNS ENABLE	OFF
	REGISTER
DDNS STATUS

http://g0808f3.websamsung.net:80

OK

ESC

English _37

Image 37

Contents Channel DVR 2X Zoom KEY FeaturesStandards Approvals Important Safety Instructions Overview Before Start BatteryInstallation CD User’s Manual Remote Control/Battery AAAX2What’s Included DVRContents Client Setup What is Web Viewer?Remote Setup Appearance & DimensionFront Panel Rear Panel Audio Remote Control AT a Glance The rack installation is available only in shelf type Checking the Installation EnvironmentInstalling HDD Connecting to video, audio, and monitor Connecting to a Different DeviceConnecting to RS-485, alarm USB Connection Network ConnectionConnect the power cable of the DVR to the wall outlet LoginLive Getting StartedHDD Auto Live Screen ConﬁgurationFull Zoom View the Launcher MenuPIP Display Mode SwitchSplit Screen Single Screen of CH Auto Sequence ZoomFreeze CH4 CH1PTZ RecordPercent Search SearchDate/Time Search Search menu appearsEvent Search PlayEvent Search Specify a time in Main Menu Configuration To set the event updateInterval Setup Event Update Event MonitoringEvent Monitoring on the Spot Monitor Spot SetupUsing the mouse Using the MenuUsing the buttons on the remote control or the front panel  SetupVGA Setup Display SetupDisplay Setup VGA SetupOSD Setup Screen Display SetupOSD Setup Record SetupRecord Setup Quality Select the quality from Highest, High and NormalSETUP, and press OK Schedule SetupSchedule Setup screen appears Schedule SetupConfiguration ConfigurationHDD Management HDD ManagementCamera Setup Camera SetupChannel Select a channel to change the title Alarm Setup Motion Setup By default, all cells are set to disabled Motion SetupSetup Interval SetupAlarm Setup Auto sequence interval for each camera channelPassword Setup Date/Time SetupDATE/TIME Setup User ID Select a user ID Buzzer SetupKEY Tone Set the key tone of the button OccursIP Setup TCP/IP SetupTCP/IP Setup External DeviceWhat is DDNS? Ddns SetupIP Setup Ddns SetupCommand Setup PTZ SetupPTZ Setup Command SetupSpeed Setup Speed SetupMouse Setup Mouse SetupSpecify the Sensitivity Spot Setup Audio SetupAdjust the I/O volume Audio SetupBackup BackupYou can backup HDD recording data on a USB storage device Event Popup Duration Specify the event popupFile System is not Supported System MessagesSize is Larger than Free Space Upgrade Firmware UpgradeYou can upgrade the DVR ﬁ rmware with the latest version Firmware UpgradeFactory Default Factory DefaultChanging Factory Default Select Load Setup Load SetupLanguage You can select a language to your preferenceConnection Network Connection and SettingsStatic IP Mode If you are not using a router for network connectionDynamic IP Dhcp Mode Set Dhcp Mode to Manual in Main MenuUsing DVR Static IP If using a routerDVR Network Router Dhcp IP AddressPort Forwarding of Web Server Port Router Port Forwarding with IP/Port RouterConnecting to the WEB Viewer What is WEB VIEWER?System Requirements  WEB ViewerWEB Viewer AT a Glance Web Viewer Setup Client SetupUpdate To register a web siteBuzzer Remote SetupTo return to the Web Viewer screen, click Close You can set the recording schedule Refer to Schedule SETUP. You can set the recording quality Refer to Record SETUP.Record Conﬁguration Record SchedulePlayer Player at a Glance Edit Tool Image EditAudio signal will not be saved with AVI Save When done, the ‘C WEBBACKUP’ folder will openRemote Viewer Remote Viewer at a Glance You can select Single screen or 4-split modePTZ Control DVR Only the admin user account can access the Setup menu SetupEvent USB Product Specification Appendix 20C ~ +60C -4F ~ +140F Ddns20% to 85% RH 258 247 371 Appearance & DimensionTroubleshooting FAQ Audio Setup Correct disposal of batteries in this product