Samsung AP30M0ANUMG, AP30M0ANXSG manual Indoor unit, Outdoor Unit, Screw Tightening torque kgf cm

Page 37

Indoor and Outdoor Connection Wiring

When connecting the wiring harness between the indoor and outdoor unit, align the outdoor side and the indoor side with the terminal board No.

When the wiring harnesses of the indoor and outdoor unit are not properly connected, it may cause trouble.

Be careful not to allow the indoor and outdoor wirings and power lines to get in contact with the service valve of the refrigerant system or to the pipe without an insulation.

Earth

Indoor unit

Control box

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Earth

Earth

Indoor and outdoor connection wire

Outdoor Unit

Panel board

OFF

Earth

Power cable (Purchase separately)

Electrical Wiring

1.Connect it to the terminal board N and L for power cable to the outdoor unit.

In so doing, peel off the end of the power cord by about 5mm, and press the cord to the ring terminal for hooking.

-Make sure to install exclusive power supply.

If you use multiple connecting, there is a risk of electric shock or fire.

-If the outdoor power supply has been selected, install circuit breaker(ELCB). (Purchase separately)

-Make sure to connect earth wire.

-Make sure that the clamping force of the screw (on the terminal) is tightened firmly within the range of rated tightening torque.

-The appliance shall be installed in accordance with national wiring regulations for installation (SASO 2007:2002).

-Disconnection means must be incorporated in the fixed wiring in accordance with the wiring rules.

Connecting the power terminal

Connect the cables to the terminal board using the compressed ring terminal.

Use rated cables only and make sure to fix them without applying any external force to the terminal.

Connect the cables with driver and wrench that can apply the rated torque to the screws.

Make sure that appropriate tightening torque is applied for cable connection. If the terminal is loose, arc heat may occur and cause fire and if the terminal is connected too firmly, terminal may get damaged.

Screw

Tightening torque (kgfcm)

M3

5.0~6.0

M3.5

8.0~10.0

M4

12.0~15.0

M5

20.0~25.0

M6

25.0~30.0

installation part _37

Image 37
Contents DB98-33838A1 Air ConditionerStrong Turbo/Long Function Features of your new air conditionerLook for Everywhere Serial #Safety Information Safety informationImportant safety symbols and precautions DeathEnsure no water gets into the air conditioner Do not yank the power cable with handsPotential risk of injury or electric shock Do not drink drain water coming out of the air conditioner Do not open the front panel during operationDo not place any objects, especially containers with liquid Insufficient ventilation may result in poor performance Safety information Contents Checking the Indoor Unit and Display Viewing your air conditionerMain parts To open the panelControl Panel Checking the Remote controller Using the remote controller Remote controller displayInstalling the batteries Close the cover by place it back to its original positionPress the Power button on the remote controller Selecting Operation ModeOperating basic function Turning the AIR Conditioner on and OFFCool Dry Fan Set the fan speed FanUsing the Turbo function Using advanced functionsTo deactivate Turbo function To deactivate Long function Using the Long FunctionVertical air flow Adjusting the AIR Flow DirectionAir flow can be directed to your desired position Horizontal air flow To deactivate the On Timer Setting TimerOn Timer Off Timer To deactivate the Off TimerCombining On Timer and Off Timer To deactivate the timer combinationPreset time of On Timer is shorter than Off Preset time of On Timer is longer than OffUsing the AIR Conditioner with the Control Panel Locking the Control Panel When the air conditioner is on or offCleaning the Exterior Cleaning and maintaining the air conditionerCleaning the Filter Air filterPeriodical checks Maintaining Your AIR ConditionerType Description Every Once a MonthsInternal protections via the unit control system Storing the remote controllerType Description Air conditioner does not start operating immediatelyAppendix TroubleshootingCondensation may occur on the indoor unit Operation Ranges21˚C to 54˚C On the floorSafety Precautions Power supply line, fuse or circuit breaker Part Name Accessory Parts ListTop view Selection of Installation PlaceElectric wire Below 20m 5mm Below 50m 4mm Allowable voltage PowerElectrical Work Circuit BreakerOutdoor Unit Indoor unitScrew Tightening torque kgf cm Installation Procedures Installation MethodAnchor bolt fixing dimensions Outdoor UnitIndoor unit Outdoor Unit Indoor unitConnection of Refrigerant Piping Cut the pipe using the pipe cutterOuter DiameterD Amm  Drill a hole of 60mm in diameter to the outside Drilling a Hole in the WallFixing the Indoor Unit Drain HoseInsulation Foamed Polyethylene ※ Be sure that all valve cocks are closed Air PurgeVacuum PumpRefrigerant Charging Outside temperature 35CRefill the refrigerant slowly checking the pressure Stop operationCheck Check and Test OperationIs grounding properly made? Test Operation Pump Down Procedure When removing the productIndoor unit Packing and Unpacking GuideCushion-top  Packing case  Outdoor unit  Insulation tape Howto connectyour extended power cables021-8255 Questions or COMMENTS?183-2255 444 77 Samsung
Related manuals
Manual 50 pages 17.59 Kb