Samsung AR18HSFSEWKNMG manual Setting the Off timer, English-19, When the air conditioner is on

Page 19

Setting the On/Off timer

Setting the Off timer

When the air conditioner is on;

1. Press the Timer button..

2. Press the button until (Off) indicator starts to blink..

3. Press the SET button to set the Off timer..

-- (Off) indicator will keep blinking and you can set the time..

4.Press the button to set the time..

-- You can set the time in half hour unit from 30 minutes (0..5 on the display) ~ 3 hours and hour unit from 3~24 hours..

-- Time can be set from minimum 30 minutes to maximum 24 hours..

5.Press the SET button to complete the Off timer setting..

-- (Off) indicator and the set time of the timer will be displayed on the remote controller display and the Timer indicator ( ) will be displayed on the indoor unit display..

-- Off timer setting will be cancelled if you don't press the SET button within

10 seconds after setting the time.. Therefore, check for the (Off) indicator on the remote controller display and the Timer indicator ( ) on the indoor unit display..

Cancel

fFPress the

button to make the set time to display as

,

and press the SET button..

 

er03 imT

Remote controller display

fFPress the Power ( ) button..

• Off timer may not work depending on the On/Off status of the indoor unit and the On/Off status of the indicator on the remote controller display.

Only the latest setting timer will be applied between the On Timer/Off

Timer

and Off timer functions.

After setting the timer, the set time will be displayed for 3 seconds before it disappears.

If Timer function is used in Heating mode, Air conditioner work into former mode. (ARHVseries)

Combining On Timer and Off Timer

When the air conditioner is off

When the air conditioner is on

 

 

When set time on On timer is shorter than Off timer

When set time on On timer is longer than Off timer

Ex) On timer : 3 hours, Off timer : 5 hours

Ex) On timer : 3 hours, Off timer : 1 hour

- The air conditioner will turn on after 3 hours from the

- The air conditioner will turn off after 1 hour from the

moment you have set the timer and the air conditioner will

moment you have set the timer and turn on after 2 hours

remain on for 2 hours and then turn off automatically..

from the moment it was turned off..

 

 

• Set time for the On timer and the Off timer should be different from each other..

• When the On timer and the Off timer is set, setting can be cancelled by pressing the Power button..

English-19

A3050 MG Model IB&IM_DB68-04542A_HP_EN.indd 19

2014/4/1 11:48:56

Image 19
Contents Air Conditioner Contents Features of your new air conditioner English-4 Safety precautions01epPr aration English-5English-6 For UsingEnglish-7 English-8 Do not place objects or devices under the indoor unitEnglish-9 For CleaningOperation ranges Checking before useEnglish-10 English-11 Technical SpecificationsDisplay Operation indicatorChecking the name of the parts Main partsRemote controller buttons Checking the remote controllerEnglish-13 Inserting the batteries Remote controller displayLow Battery warning Storing the remote controllerBasic function Press the button to set the desired fan speed Press the button to adjust the temperatureEnglish-16 English-17 Adjusting the air flow directionVertical air flow Horizontal air flowEnglish-18 Setting the On/Off timerSetting the On timer When the air conditioner is offPress the SET button Setting the Off timerWhen the air conditioner is on English-19English-20 ModeAdditional options available 04 Optio When the air conditioner is operating in Cool modeStep cooling function English-21English-22 Using the Fast functionUsing the Comfort function When the air conditioner is operating in Cool/Heat modeBlink and press the SET button Using the Single user functionSingle user function is only available in Cool/Heat mode English-2316C ~ 30 C Using the Quiet functionQuiet function is only available in Cool/Heat mode English-24English-25 Using the Auto clean functionSetting the Beep sound When the air conditioner is operatingCleaning the outdoor unit heat exchanger Cleaning the air conditionerCleaning the indoor unit Such as thinner, kerosene and acetone etc. to cleanRemove the Air filter from the main body Cleaning the air filterRemoving the Air filter English-27English-28 Reassembling the Air filterTop of the Air filter into the the main body.  English-29 Maintaining the air conditionerS06r Othe Air conditioner TroubleshootingEnglish-30 Press the Power button or disconnect the power plug Mode. In cool mode Adjustment is notMode is operating in Heat mode, you can adjust the air You cannot adjust the fan speedGeneral information Installing the unitEnglish-32 Indoor unit Choosing the installation locationPower supply line, fuse or circuit breaker  a place where the air filter can be replaced easilyEnglish-34 Outdoor UnitEnglish-35 When installing more than 1 outdoor unitTop view Side view English-36 AccessoriesAccessories in the indoor unit case Accessories in the outdoor unit caseEnglish-37 Optional accessoriesTools required for installation General Tools Tools for test operationsModel Fixing the installation plateEnglish-38 Right a Left B Undersideright C Rearright or left DEnglish-39 This QR code for detail video of indoor unit installationAssembling the hanger screw Removing the screwsEnglish-40 Assembling the Cover panel After mounting the indoor unitRemoving the Cover panel Before mounting the indoor unit English-41 Connecting the assembly cableCable specification Connecting the cableEnglish-42 Each wire is labeled with the corresponding terminal numberTorque English-43Smooth the cut edges Cut off the remaining foam insulationUnscrew the caps at the end of each pipe Evacuating the indoor unitCutting or extending the pipe English-44Put a flare nut slightly into the pipe and modify the flare English-45Depth a English-46 Drain hose installationDrain hose Extension Change the direction only when it is necessaryEnglish-47 40~45 mmEnsure that condensation draining is adequate Evacuating the connected pipesEnglish-48 Connect a drain hose to the drain plugIf you use a pipe longer than 5 m Adding RefrigerantEnglish-49 Outer Torque the factory refrigerant charge of the product English-50Cylinder with siphon Please fill in with indelible inkEnglish-51 Performing the gas leak testsProperly Model Outdoor unit installed on the wall by rackFixing the outdoor unit in place English-52English-53 Smart Install mode Off / Blinking / On English-54English-55 Final check and trial operationEnglish-56 Packing and unpacking guideAfter tube contraction work is completed, wrap it with How to connect your extended power cablesEnglish-57 Apply heat to the contraction tube to contract it021-8255 Questions or COMMENTS?