Adjusting the air flow direction
Vertical air flow
This function will allow you to adjust the air flow direction vertically..
Press the 
button to make air flow blades vertically.
To keep the air flow direction in a constant direction, press the 
button again.. The air flow blade(s) will stop the movement..
If you adjust the vertical air flow blade manually, it may not close completely when you turn off the air conditioner.
• Adjusting the air flow direction is not available in good'sleep mode while it is in
cool mode.
• However, you can adjust the air flow direction in good'sleep mode while it is in heat mode.
Remote controller display
Horizontal air flow
Make sure one of the blade pin lever that stick out of the air flow blades are not broken.
Move the blade pin lever left or right to keep the air flow direction in a constant position you prefer.
• Be extremely careful with your fingers while adjusting the Horizontal air flow direction.
There is a potential risk of personal injury when the unit is mishandled.
Blade pin lever
N NCTIO 02ASICBFU
English-17
A3050 MG Model
2014/4/1 11:48:55