Samsung AR18HVFSEWKNMG, AR24HVFSEWKNMG manual Mode, English-20, Additional options available

Page 20

mode

For a comfortable sleep, the air conditioner will operate in 3 stages in order of Fall asleep Sound sleep Wake up stage.. When the air conditioner is operating in Cool/Heat mode;

1.

Press the Timer button..

 

2.

Press the

button until (

) indicator starts to blink..

3.

Press the SET button to set the

mode..

 

--

) indicator will keep blinking and you can set the time..

4.Press the button to set the time..

-- You can set the time in half hour unit from 30 minutes (0..5 on the display) ~ 3 hours and hour unit from 3~12 hours..

-- Time can be set from minimum 30 minutes to maximum 12 hours..

 

-- Default time setting for the

mode is 8 hours..

 

 

5. Press the SET button to complete the

mode setting..

 

 

--

) indicator and the set time of the

mode will be displayed on

 

the remote controller display..

 

 

 

-- Timer indicator (

) will be displayed on the indoor unit display..

 

 

--

mode setting will be cancelled if you don't press the SET button within

 

10 seconds after setting the time.. Therefore, check for the ( ) indicator on the

 

 

remote controller display and the Timer indicator ( ) on the indoor unit display..

 

 

Cancel

fFPress the

button to make the set time to display as

,

 

 

and press the SET button..

 

 

Remote controller display

 

 

 

 

 

 

 

 

 

 

 

Additional options available in

mode

 

You can set the desired temperature by 1˚C in the range of 16˚C~30˚C.

Fan speed will be adjusted automatically according to themode.

However, If you selectmode while heating operation is on, you can adjust fan speed.

When the mode is on.

In Cool mode: Air flow direction will be adjusted automatically.

In Heat mode: Adjusting air flow direction is available.

Temperature and fan speed change in mode

•• Fall asleep: Eases you into sleep by dropping the temperature..

•• Sound sleep: Relaxes your body and raises your temperature slightly..

•• Wake up: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed..

• Recommended set temperature is between 25 °C ~ 27 °C for cooling and 21 ˚C~23 ˚C for heating.

• If the set temperature is too low, you may feel cold during sleep or catch a cold..

Optimal operation hour of mode is 8 hours.. Therefore, if the time is set too short or long, you may not feel as comfortable as you would expect..

If the mode is set over 5 hours, Wake up stage will begin when 1 hour is remaining in the operation time and the air conditioner will stop automatically..

When the On timer and the function is set simultaneously, the air conditioner will only apply the function that was set later..

English-20

A3050 MG Model IB&IM_DB68-04542A_HP_EN.indd 20

2014/4/1 11:48:56

Image 20
Contents Air Conditioner Contents Features of your new air conditioner Safety precautions English-4English-5 01epPr arationFor Using English-6English-7 Do not place objects or devices under the indoor unit English-8For Cleaning English-9English-10 Checking before useOperation ranges Technical Specifications English-11Operation indicator Checking the name of the partsMain parts DisplayEnglish-13 Checking the remote controllerRemote controller buttons Remote controller display Low Battery warningStoring the remote controller Inserting the batteriesBasic function English-16 Press the button to adjust the temperaturePress the button to set the desired fan speed Adjusting the air flow direction Vertical air flow Horizontal air flow English-17Setting the On/Off timer Setting the On timerWhen the air conditioner is off English-18Setting the Off timer When the air conditioner is onEnglish-19 Press the SET buttonAdditional options available ModeEnglish-20 When the air conditioner is operating in Cool mode Step cooling functionEnglish-21 04 OptioUsing the Fast function Using the Comfort functionWhen the air conditioner is operating in Cool/Heat mode English-22Using the Single user function Single user function is only available in Cool/Heat modeEnglish-23 Blink and press the SET buttonUsing the Quiet function Quiet function is only available in Cool/Heat modeEnglish-24 16C ~ 30 CUsing the Auto clean function Setting the Beep soundWhen the air conditioner is operating English-25Cleaning the air conditioner Cleaning the indoor unitSuch as thinner, kerosene and acetone etc. to clean Cleaning the outdoor unit heat exchangerCleaning the air filter Removing the Air filterEnglish-27 Remove the Air filter from the main bodyTop of the Air filter into the the main body.  Reassembling the Air filterEnglish-28 S06r Othe Maintaining the air conditionerEnglish-29 English-30 TroubleshootingAir conditioner Mode. In cool mode Adjustment is not Mode is operating in Heat mode, you can adjust the airYou cannot adjust the fan speed Press the Power button or disconnect the power plugEnglish-32 Installing the unitGeneral information Choosing the installation location Power supply line, fuse or circuit breaker a place where the air filter can be replaced easily Indoor unitOutdoor Unit English-34Top view Side view When installing more than 1 outdoor unitEnglish-35 Accessories Accessories in the indoor unit caseAccessories in the outdoor unit case English-36Optional accessories Tools required for installation General ToolsTools for test operations English-37Fixing the installation plate English-38Right a Left B Undersideright C Rearright or left D ModelThis QR code for detail video of indoor unit installation Assembling the hanger screwRemoving the screws English-39Removing the Cover panel Before mounting the indoor unit Assembling the Cover panel After mounting the indoor unitEnglish-40 Connecting the assembly cable Cable specificationConnecting the cable English-41Each wire is labeled with the corresponding terminal number English-42English-43 Smooth the cut edgesCut off the remaining foam insulation TorqueEvacuating the indoor unit Cutting or extending the pipeEnglish-44 Unscrew the caps at the end of each pipeDepth a English-45Put a flare nut slightly into the pipe and modify the flare Drain hose installation English-46Change the direction only when it is necessary English-4740~45 mm Drain hose ExtensionEvacuating the connected pipes English-48Connect a drain hose to the drain plug Ensure that condensation draining is adequateAdding Refrigerant English-49Outer Torque If you use a pipe longer than 5 mEnglish-50 Cylinder with siphonPlease fill in with indelible ink  the factory refrigerant charge of the productPerforming the gas leak tests English-51Outdoor unit installed on the wall by rack Fixing the outdoor unit in placeEnglish-52 Properly ModelSmart Install mode English-53English-54  Off / Blinking / OnFinal check and trial operation English-55Packing and unpacking guide English-56How to connect your extended power cables English-57Apply heat to the contraction tube to contract it After tube contraction work is completed, wrap it withQuestions or COMMENTS? 021-8255