Disassembling/Assembling the Cover panel for indoor unit installation
Removing the Cover panel (Before mounting the indoor unit)
The bottom panel fits the main body using the side, center, and bottom hooks as shown. Unlock the side hooks first, and then unlock the center and bottom hooks.
Check the location of the hooks before removing the cover panel.
Side 
hooks
Center hooks
Bottom hooks
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Center hook | Bottom hook | ||
|
|
|
|
|
|
|
|
For specific Hook location and quantity, please refer to cover panel with indicating arrows based on physical goods.
ffRemoving the hooks on the side | ffRemoving the hooks on the central part |
② ①
Caution (fragile)
Caution (fragile)
Assembling the Cover panel (After mounting the indoor unit)
To assemble the Cover panel, proceed in reverse order of disassembling.
Use both hands for assembling and be extra careful not to damage the pipes and drain hose.
Lock the side, center, and bottom hooks in this sequence. Tighten the bottom panel with the screws, and close the screw holes with their cap.
<Lock the side hook> | <Lock the bottom hook> |
<Fasten the screw> | <Assemble the Cap screw> |
English-40
A3050 MG Model
2014/4/2 9:49:54