1. Place the Wall Mount Guide against the wall | c If the markings do not correspond to the | |
surface. | positions of studs, make sure you insert | |
● The Wall Mount Guide must be level. | appropriate anchors or mollies into the holes | |
● | If your TV is mounted on the wall, install the | before you insert the support screws. If you use |
| anchors or mollies, make sure the holes you drill | |
| Soundbar at least 5 cm below the TV. | |
| are large enough for the anchors or mollies you |
use.
5 cm or more
5. Push a screw (not supplied) through each
2. Align the Paper Template's Centre Line with the centre of your TV (if you are mounting the Soundbar below your TV), and then fix the Wall Mount Guide to the wall using tape.
cIf you are not mounting below a TV, place the Centre Line in the centre of the installation area.
6. Use the two Screws (M4 x L12) to attach both
A | B | CENTER LINE |
B | A | |
|
|
Centre Line
3.Push a pen tip or sharpened pencil tip through the centre of the
4.Using an appropriately sized drill bit, drill a hole in the wall at each marking.
· 12 · English