CONNECTING TO YOUR TV
You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.
cImportant: Before you begin, put the battery into the remote. See page 14 for instructions.
Method 1. Connecting with a Cable
Check the DIGITAL AUDIO IN (OPTICAL)
port of the Soundbar main unit.Check the OPTICAL OUT port of your TV.
DIGITAL AUDIO IN | Optical Cable |
(OPTICAL) |
|
OPTICAL OUT
Bottom of the Soundbar
1.Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable.
2.Press the 
button on the right side of the Soundbar or the SOURCE button on the remote control to select the D.IN mode.
D.IN
cIf TV sound is not output, press the 
button on the right side of your Soundbar or the SOURCE button on the remote control to select the D.IN mode on Soundbar main unit display.
cPress the button on the remote control for 5 seconds to turn Auto Power Link on or off. (Auto Power Link is set to ON by default.)
· 7 · English