REMOTE CONTROL BUTTONS & FEATURES
Inserting Battery before using the Remote Control
1.Use a suitable coin to turn the remote control's battery cover
counterclockwise to remove it as shown in the figure below.
2. Insert a 3V lithium battery. Keep the positive (+) pole facing up when inserting the battery. Put the battery cover on, and then align the '●' marks side by side as shown in the figure below.
3. Use a suitable coin to turn the remote control battery cover clockwise as far as it will go to fix it in place.
Controlling the Soundbar using Your TV Remote
Control
1.Press and hold the 
SOUND button for more than 5 seconds while the Soundbar is turned on.
2."ON - TV REMOTE" appears on the Soundbar's display.
3.In the TV's menu, set the TV speaker to external speaker.
cOnly the VOL +/- and 
buttons are available to control the Soundbar.
cTV menus differ by manufacturer and model. Refer to the TV's user
manual for further information.
cThis function is not available when the Soundbar is in the TV SoundConnect mode.
cManufacturers supporting this function:
●VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA
●This function may not be compatible with your TV's remote depending on the remote control's manufacturer.
cTo turn off this function, press the 
SOUND button for 5 seconds. "OFF - TV REMOTE" appears on the Soundbar's display.
Turns the Soundbar on and off.
Power
Press to select a source connected to the Soundbar.