TROUBLESHOOTING
Before seeking assistance, check the following.
The unit will not turn on.
Is the power cord plugged into the outlet?
➮Connect the power plug to the outlet.
A function does not work when the button is pressed.
Is there static electricity in the air?
➮Disconnect the power plug and connect it again.
Sound is not produced.
Is the Mute function on?
➮Press the 
(Mute) button to cancel the function. Is the volume set to minimum?
➮Adjust the Volume.
The remote control does not work.
Is the battery drained?
➮Replace with new battery.
Is the distance between the remote control and Soundbar main unit too far?
➮Move the remote control closer to the Soundbar main unit.
The TV SoundConnect (TV pairing) failed.
Does your TV support TV SoundConnect?
➮TV SoundConnect is supported by some Samsung TVs released from 2012 on. Check your TV to see if it supports TV SoundConnect.
Is your TV firmware the latest version?
➮Update your TV with the latest firmware. Does an error occur when connecting?
➮Contact the Samsung Call Centre.
➮Reset TV SoundConnect and connect again. To reset the TV SoundConnect connection, press and hold the p button for 5 seconds.
The blue indicator on the rear of the subwoofer is not lit and the subwoofer is not producing sound.
Is the Soundbar main unit power on?
➮Check the power cord. If the power cord is plugged in correctly, check the Soundbar main unit. If your main unit is off (in standby mode), the subwoofer will also be in standby mode and the blue LED won't be lit.
Your subwoofer may not be connected to the Soundbar main unit.
➮Try to connect your subwoofer again. See page 5.
LICENCE
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the
For DTS patents, see http://patents.dts.com. Manufactured under licence from DTS Licencing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
· 16 · English