Samsung AR30MSFTBWKNTV manual Remote Control Operation, Operation modes, Controlling temperature

Page 15

At a Glance

Remote Control Operation

You can use the air conditioner easily by selecting a mode and then by controlling the temperature, fan speed, and air direction.

Operation modes

You can change the current mode between Auto, Cool, Dry,

Fan, and Heat by pressing the button.

Controlling temperature

You can control the temperature in each mode as follows:

Mode

Temperature control

 

 

Auto/Cool/

Adjust by 1 °C between 16 °C and 30 °C.

Heat

 

 

 

Dry

Adjust by 1 °C between 18 °C and 30 °C.

 

 

Fan

You cannot control the temperature.

 

 

NOTE

You can use the Cool, Dry, and Heat modes in the following conditions:

Mode

Cool

Dry

Heat

 

 

 

 

Indoor

16 °C to 32 °C

16 °C to 32 °C

27 °C or less

temperature

 

 

 

 

Outdoor

-10 °C to 48 °C

-10 °C to 48 °C

-15 °C to 24 °C

temperature

 

 

 

 

Indoor

80% or less

 

 

relative

_

_

humidity

humidity

 

 

 

 

 

 

 

 

 

If the air conditioner operates in a high humidity environment in the Cool mode for an extended period of time, condensation may occur.

If the outdoor temperature drops to -5°C, the heating capacity may decrease to as much as 60% to 70% of the specified capacity.

14English

Image 15
Contents Questions or COMMENTS? Air conditioner Contents Installation For Installation Safety InformationSafety Information For Power Supply For Using Safety Information Safety Information For Cleaning Correct disposal of batteries in this product Indoor Unit Overview Display09/12/18 24/30 Two 1.5V AAA type batteries Remote Control OverviewRemote Control Operation Controlling temperatureOperation modes Controlling fan speed Controlling air flow directionHorizontal air flow manual Cool mode Cooling OperationStep cooling function Dehumidifying Operation Dry modeHeating Operation Heat modeQuick Smart Features Auto modeFan mode Comfort function Fast functionQuiet function Beep sound functionSingle user function Energy-Saving OperationIs off Timed on/Timed off functionGood’sleep function To 27 CTo 23 C Heat, Fan Cleaning at a GlanceRunning Auto clean Auto HeatCleaning the filter Vacuum cleaner Soft brush MinutesMild detergent Troubleshooting Cleaning and Maintenance Cleaning and Maintenance Cleaning and Maintenance Safety Information on Installation Installation of the unitGeneral information Power supply line, fuse, or circuit breaker Preparation Choosing the installation locationOverview of installation location requirements When installing 1 outdoor unit 6 cases Unit mmAccessories in the indoor unit package Checking and preparing accessories and toolsAccessories When installing more than 1 outdoor unit 5 cases Unit mmTools Optional accessoriesAccessories in the outdoor unit package Drilling a hole through the wallDrill the hole Be sure to drill only one hole Taping the pipes, cables, and drain hosePower & Communication cable shall not exceed 30m Indoor Unit InstallationOptional Extending the power cable Prepare a compressor and the following toolsApply heat to the contraction tube to contract it Electric shock or a fire Installing and connecting the drain hoseInstall the drain hose Optional Extending the drain hoseOptional Changing the direction of the drain hose Shortening or extending the refrigerant pipes assembly pipe When fixing the indoor unit on a gypsum board Fixing the installation plateWhen fixing the indoor unit on a wall When fixing the indoor unit on a window frameOptional Fixing the outdoor unit to a wall with a rack Outdoor Unit InstallationUsing anchor bolts Fixing the outdoor unit in placeEvacuating the air Adding refrigerant Pumping down refrigerant Installation InspectionPerforming the gas leak tests Performing final check and trial operationPumping down for removing the product