Samsung AR18MSFTBWKNTV, AR30MSFTBWKNTV, AR24MSFTBWKNTV, AR12MSFTBWKNTV Cleaning and Maintenance

Page 29

Cleaning and Maintenance

Problem

Solution

 

 

 

• Check whether the air conditioner is running

 

the defrost function. When ice forms in

 

winter or the outdoor temperature is too low,

 

the air conditioner runs the defrost function

 

automatically. While this function is running,

 

the indoor fan stops and warm air does not

 

come out.

Cool or warm air

• Check whether doors or windows are open.

does not come

This may cause poor cooling or heating

out of the air

performance. Close the doors and windows.

conditioner.

• Check whether the air conditioner is turned

 

on immediately after the cooling or heating

 

operation stops. In this case, only the fan

 

runs to protect the outdoor unit compressor.

 

• Check whether the pipe length is too long.

 

When the pipe length exceeds the maximum

 

pipe length, the cooling and heating

 

performance may decrease.

 

 

 

• Check whether the good'sleep function is

I cannot change

running. While this function is running, you

the air flow

cannot control the air flow direction. (But

direction.

you can control the air flow direction if this

 

function is running in the Heat mode.)

 

 

 

• When the Auto, Dry, or Fast mode is running

I cannot change

or the good'sleep function is running in the

Cool mode, the air conditioner controls the

the fan speed.

fan speed automatically and you cannot

 

 

change the fan speed.

 

 

28English

Image 29
Contents Questions or COMMENTS? Air conditioner Contents Installation For Installation Safety InformationSafety Information For Power Supply For Using Safety Information Safety Information For Cleaning Correct disposal of batteries in this product 09/12/18 24/30 Indoor Unit OverviewDisplay Two 1.5V AAA type batteries Remote Control OverviewOperation modes Remote Control OperationControlling temperature Horizontal air flow manual Controlling fan speedControlling air flow direction Step cooling function Cool modeCooling Operation Dehumidifying Operation Dry modeHeating Operation Heat modeFan mode Quick Smart FeaturesAuto mode Comfort function Fast functionQuiet function Beep sound functionSingle user function Energy-Saving OperationIs off Timed on/Timed off functionTo 23 C Good’sleep functionTo 27 C Running Auto clean Cleaning at a GlanceAuto Heat Heat, FanMild detergent Cleaning the filterVacuum cleaner Soft brush Minutes Troubleshooting Cleaning and Maintenance Cleaning and Maintenance Cleaning and Maintenance General information Safety Information on InstallationInstallation of the unit Power supply line, fuse, or circuit breaker Overview of installation location requirements Choosing the installation locationWhen installing 1 outdoor unit 6 cases Unit mm PreparationAccessories Checking and preparing accessories and toolsWhen installing more than 1 outdoor unit 5 cases Unit mm Accessories in the indoor unit packageAccessories in the outdoor unit package Optional accessoriesDrilling a hole through the wall ToolsDrill the hole Be sure to drill only one hole Taping the pipes, cables, and drain hosePower & Communication cable shall not exceed 30m Indoor Unit InstallationApply heat to the contraction tube to contract it Optional Extending the power cablePrepare a compressor and the following tools Install the drain hose Installing and connecting the drain hoseOptional Extending the drain hose Electric shock or a fireOptional Changing the direction of the drain hose Shortening or extending the refrigerant pipes assembly pipe When fixing the indoor unit on a wall Fixing the installation plateWhen fixing the indoor unit on a window frame When fixing the indoor unit on a gypsum boardUsing anchor bolts Outdoor Unit InstallationFixing the outdoor unit in place Optional Fixing the outdoor unit to a wall with a rackEvacuating the air Adding refrigerant Performing the gas leak tests Installation InspectionPerforming final check and trial operation Pumping down refrigerantPumping down for removing the product