Samsung AR09MSFTBWKNTV, AR30MSFTBWKNTV, AR24MSFTBWKNTV, AR12MSFTBWKNTV manual Troubleshooting

Page 28

Troubleshooting

If the air conditioner operates abnormally, refer to the following chart to save time and unnecessary expenses.

Problem

Solution

 

 

 

• Check the power status, then operate the air

 

conditioner again.

 

• Switch on the circuit breaker, plug in the

The air

power cord, then operate the air conditioner

conditioner does

again.

not work at all.

• Make sure that the isolator is turned on.

 

• Check whether the Timed off function is

 

running. Operate the air conditioner again by

 

pressing the Power button.

 

 

 

• Check whether the Fan or Fast mode is

I cannot change

running. In these modes, the air conditioner

the temperature.

controls the set temperature automatically,

 

and you cannot change the set temperature.

 

 

 

• Check whether the set temperature is higher

 

in the Cool mode or lower in the Heat mode

 

than the current temperature. Press the

 

Temperature button on the remote control to

Cool or warm air

change the set temperature.

does not come

• Check whether the air filter is blocked with

out of the air

dirt. If the air filter is blocked, the cooling

conditioner.

and heating performance may decrease.

 

Remove dirt regularly.

 

• Check whether the outdoor unit is covered

 

or installed near obstacles. Remove the

 

coverings and obstacles.

 

 

Cleaning and Maintenance

English 27

Image 28
Contents Questions or COMMENTS? Air conditioner Contents Installation Safety Information For InstallationSafety Information For Power Supply For Using Safety Information Safety Information For Cleaning Correct disposal of batteries in this product Display Indoor Unit Overview09/12/18 24/30 Remote Control Overview Two 1.5V AAA type batteriesControlling temperature Remote Control OperationOperation modes Controlling air flow direction Controlling fan speedHorizontal air flow manual Cooling Operation Cool modeStep cooling function Dry mode Dehumidifying OperationHeat mode Heating OperationAuto mode Quick Smart FeaturesFan mode Fast function Comfort functionBeep sound function Quiet functionEnergy-Saving Operation Single user functionTimed on/Timed off function Is offTo 27 C Good’sleep functionTo 23 C Cleaning at a Glance Running Auto cleanAuto Heat Heat, FanVacuum cleaner Soft brush Minutes Cleaning the filterMild detergent Troubleshooting Cleaning and Maintenance Cleaning and Maintenance Cleaning and Maintenance Installation of the unit Safety Information on InstallationGeneral information Power supply line, fuse, or circuit breaker Choosing the installation location Overview of installation location requirementsWhen installing 1 outdoor unit 6 cases Unit mm PreparationChecking and preparing accessories and tools AccessoriesWhen installing more than 1 outdoor unit 5 cases Unit mm Accessories in the indoor unit packageOptional accessories Accessories in the outdoor unit packageDrilling a hole through the wall ToolsTaping the pipes, cables, and drain hose Drill the hole Be sure to drill only one holeIndoor Unit Installation Power & Communication cable shall not exceed 30mPrepare a compressor and the following tools Optional Extending the power cableApply heat to the contraction tube to contract it Installing and connecting the drain hose Install the drain hoseOptional Extending the drain hose Electric shock or a fireOptional Changing the direction of the drain hose Shortening or extending the refrigerant pipes assembly pipe Fixing the installation plate When fixing the indoor unit on a wallWhen fixing the indoor unit on a window frame When fixing the indoor unit on a gypsum boardOutdoor Unit Installation Using anchor boltsFixing the outdoor unit in place Optional Fixing the outdoor unit to a wall with a rackEvacuating the air Adding refrigerant Installation Inspection Performing the gas leak testsPerforming final check and trial operation Pumping down refrigerantPumping down for removing the product