Quadra-Fire VOYAGEUR-MBK, VOYAGEUR-PMH owner manual Table of Contents

R

VOYAGEUR Wood Insert

!Safety Alert Key:

•DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury.

•WARNING! Indicates a hazardous situation which, if not avoided may result in death or serious injury.

•CAUTION! Indicates a hazardous situation which, if not avoided, may result in minor or moderate injury.

•NOTICE: Indicates practices which may cause damage to the appliance or to property.

TABLE OF CONTENTS

Congratulations		2
Sample of Safety/Serial Number Label		2
Warranty Policy		4-5
Section 1: Listing and Code Approvals
A.	Appliance Certifi cations	6
B.	Mobile Home Approved	6
C.	Glass Specifi cations	6
D.	BTU & Effi ciency Specifi cations	6
	User’s Guide
Section 2: Operating Instructions
A.	Your Wood Appliance	7
B.	Fire Safety	8
C.	Overfi ring	8
D.	Combustible/Non-combustible Material	8
E.	Seasoned Wood	8
F.	Burning Process	9
G.	Automatic Combustion Control (ACC)	10
H.	Air Controls	10
I.	Burn Rates and Operating Effi ciency	11
J.	Correct Baffl e & Blanket Placement	12
K.	Building a Fire	13
L.	Fuel Reloading Instructions	13
M.	Wood Fuel & Storage	14
N.	Blower Control Box Snap Disc Operations	15
O.	Blower Operating Instructions	15
P.	Clear Space	16
Q.	Frequently Asked Questions	16
R.	Opacity (Smoke)	16
S.	Quick Start Guide	17
Section 3: Maintenance and Service
A.	Disposal of Ashes	18

B.Chimney & Chimney Connector

	Inspection/Cleaning	18
C.	Appliance Inspection - Routine	18
D.	Cleaning of Plated Surfaces	18
E.	Glass Cleaning	19

F.Firebrick Inspection & Replacement Instruction19

G.	Quick Reference Maintenance Guide	20
Section 4: Troubleshooting Guide		21
Section 5: Service Parts Replacement
A.	Glass Replacement	22
B.	Snap Disc Replacement	22
C.	Wiring Diagram	22
D.	Blower Replacement	23
E.	Door Handle Assembly	24
F.	Baffl e & Ceramic Blanket Removal	25
G.	Tube Channel Assembly Replacement	24

Installer’s Guide

Section 6: Getting Started

A.Design, Installation & Location

	Considerations	26
B.	Draft	26
C.	Negative Pressure	27
D.	Locating Your Appliance and Chimney	28
E.	Chimney Termination Requirements	28
F.	2-10-3 Rule	29
G.	Tools and Supplies Needed	30
H.	Fire Safety	30
I.	Inspect Appliance and Components
	and Pre-Burn Checklist	30
Section 7: Dimensions and Clearances
A.	Appliance Dimensions	31

B.Clearances to Combustibles (UL and ULC)

	and Hearth Protection Requirements	32-33
C.	Alternate Floor Protection Calculation	34
Section 8: Chimney Systems
A.	Venting Systems	35
B.	Inspections	35
C.	Larger Chimneys	35
D.	Masonry Chimney	35-36
E.	Metal Heat Circulating Chimney	37
F.	Prefabricated Metal Chimney	37
G.	Securing Chimney Components	38
H.	Altering the Fireplace	38
I.	Factory-Built Solid Fuel Fireplaces	38
J.	Ovalizing Round Stainless Steel Liners	39
K.	Chimney Height / Rise and Run	39
Section 9: Appliance Set-up
A.	Outside Air Installation	40
B.	Optional Elbow Flue Adapter Installation	41
C.	Securing Stove Pipe/Liner to Flue Collar	41
D.	Leveling Legs	41
E.	Securing Appliance to Stove Pipe/Liner	42
F.	Standard Surround & Trim Installation	42

G.Standard Surround & Cast Trim,.......................43

H.	All Cast Surround	44
I.	Blower Cord Installation - Left Side	44-46
Section 10: Moble Home Installation		47
Section 11: Reference Materials
A.	Exploded Drawings	48-49
B.	Service Parts & Accessories	50-53
C.	Service Maintenance Log	54-5
D.	Contact Information	56

November 22, 2011 7063-173D Page 3