R
VOYAGEUR Wood Insert
Figure 45.1
4.Remove the 2 screws at the top of the control plate. Push the bottom of the control plate to the inside of the appliance and partially remove the control plate assembly.
Green Grounding
Wire
Remove Screw
Figure 45.4
6.Remove the screw that is holding the ground lug to the control plate.
WHITE WIRE
BLACK WIRE
Figure 45.2
Figure 45.5
7. Use needle nose pliers to remove the strain relief that protects the power cord from the control plate.
5. Locate the black and white wires that are part of the power cord and disconnect those wires from the wire harness.
Placement Slot
Blower Access
Assembly
Grille hinges | Hold Down | |
downward | ||
Bracket | ||
|
Figure 45.3
Snap Disc Bracket
Blower Control Plate |
Remove Screws & |
| |
Pull Access Assembly | Remove Screws from Hold Down | |
away from Insert | ||
Bracket and Pull Blower Assembly | ||
| ||
| Forward. Do not Remove Blower from | |
| the Hold Down Bracket |
November 22, 2011 | Page 45 |