D. After Appliance is Lit
Initial Break-in Procedure
When you light your appliance, you may notice that it pro- duces heat which does have an associated odor or smell. If you feel this odor is excessive it may require the initial three to four hour continuous burn on high followed by a second burn up to 12 hours to fully drive off any odor from paint and lubricants used in the manufacturing process. Condensation on the glass is normal.
NOTE: The appliance should be run three to four hours on the initial
During this
WARNING
Fire Risk.
High Temperatures.
Keep combustible household items away from appliance. Do NOT obstruct combustion and ventilation air.
•Do NOT place combustible items on top of or in front of appliance.
•Keep furniture, draperies away from appliance.
CAUTION
•Prevent accidental appliance operation when not attended.
•Unplug or remove batteries from remote control if absent or if appliance will not be used for an extended period of time.
•Property damage possible from elevated temperatures.
CAUTION
Smoke and odors released during initial operation.
•Open windows for air circulation.
•Leave room during initial operation.
•Smoke may set off smoke detectors.
Smoke and odors may be irritating to sensitive individuals.
WARNING
Fire Hazard.
Keep combustible materials, gasoline and other flammable vapors and liquids clear of appliance.
•Do NOT store flammable materials in the appliance’s vicinity.
•Do NOT use gasoline, lantern fuel, kerosene, charcoal lighter fluid or similar liquids in this appliance.
•Combustible materials may ignite.
E. Frequently Asked Questions
ISSUE | SOLUTIONS |
Condensation on the glass | This is a result of gas combustion and temperature variations. As the appliance warms, |
| this condensation will disappear. |
Blue flames | This is a result of normal operation and the flames will begin to yellow as the appliance |
| is allowed to burn for 20 to 40 minutes. |
Odor from appliance | When first operated, this appliance may release an odor for the first several hours. |
| This is caused by the curing of the paint and the burning off of any oils remaining from |
| manufacturing. If appliance has not been used for some time, dust can build up and |
| cause an odor. |
Film on the glass | This is a normal result of the curing process of the paint and logs. Glass should be |
| cleaned within 3 to 4 hours of initial burning to remove deposits left by oils from the |
| manufacturing process. A |
| necessary. See your dealer. |
Metallic noise | Noise is caused by metal expanding and contracting as it heats up and cools down, |
| similar to the sound produced by a furnace or heating duct. This noise does not affect |
| the operation or longevity of the appliance. |
39 |