Monessen Hearth ILDV20PV, ILDV20NV, ILDV30NV manual Altitude Considerations, Air shutter

Page 14

ILDV20/ILDV30 Fireplace Insert

vent installation

ALTITUDE CONSIDERATIONS

This heater has been tested at altitudes ranging from sea level to 4,500 feet (1,370 m). In this testing, heater with standard orifice burns correctly with just an air shutter adjustment. If you need to resize orifice for use at high altitude, contact your dealer.

	WARNING	Failure to adjust air shutter properly may lead to improper
		Failure to adjust air shutter properly may lead to improper
		combustion which can create a safety hazard. Consult your
		dealer or installer if you suspect an improperly adjusted
		air shutter.

		Termination Kit
		AI31TK33A
		HEDV32T812
		HEDV32T1212
		HEDVRT

High Temp

Silicone

Apply high-temperature silicone to lines on both ends and secure with two (2) screws

3" and 3" UL 1777 Gas

Liner

FP1923

Figure 7

Connecting Vent Pipe to Heater

14

83D0511

Image 14

Contents Ildv Series Direct Vent Gas Fireplace Insert What to do if YOU Smell GASVent Installation General Installation InformationInstallation Insert InstallationOwner Important Safety InformationInstaller Gas is commonly known as Never connect unit to privateNon-utility gas wells. This Wellhead gasListed Vented GAS Fireplace Heater Product features and code approvalProduct Specifications Before You Start High ElevationsOrifice SIZES, Pressures and BTUs ILDV20NV ILDV20PV ILDV30NV ILDV30PVInsert dimensions ILDV20 ILDV30General installation Information Insert ApplicationsMantel clearances ClearancesInsert Clearances Hearth RequirementsInsert Placement Installation ZERO-CLEARANCE Metal Fireplace RequirementsVent installation Installation PrecautionsVent Requirements Dealer or installer if you suspect an improperly adjusted Failure to adjust air shutter properly may lead to improperCombustion which can create a safety hazard. Consult your Altitude ConsiderationsVent Configurations Manifold Removal and Installation Remove Manifold and Attach to Flex VentInsert Installation Check gas typeTo liquid petroleum LP gas Insert installationUse pipe joint sealant that is resistant Check for gas leaks Check GAS PressureDo not use open flame to Remote Wall mounted Switch Hand Held Remote ControlDo not use the entire bag of rock wool to cover burner area Log placementInstalling Logs and Rock Wool Ember Material in Firebox Place Log #6 Place Log #5 Surround installation Install SurroundInitial lighting Operating InstructionsWhat to do if YOU Smell GAS Never use an open flame to check for gas leakApproved leak testing method Lighting pilotPilot position Main burner switchLighting the burner Adjust the AIR Shutter Glass Frame Removal Glass Frame RemovalBlower Replacement Blower Parts List 20ILDV 30ILDVCleaning and Maintenance Cleaning glassRelight pilot. Refer to Maintenance Replacement Parts Replacement Parts Troubleshooting Observed Problem Possible Cause RemedyILDV20/ILDV30 Fireplace Insert Basic Warranty Lifetime WarrantyFive Year Warranty If Warranty Service is NeededMhsc AFUE%