Monessen Hearth ILDV20NV, ILDV30NV, ILDV20PV manual Surround installation, Install Surround

Page 24

ILDV20/ILDV30 Fireplace Insert

surround installation

INSTALL SURROUND

1.Remove glass door assembly. Page 29, Figure 34

2.Align cast or beveled surround holes with insert and attach with screws provided.

3.Re-attach glass door assembly.

4.Attach filigree to face by gently pushing into place.

Insert

Facing

Figure 23

Install Surround

Filigree

Glass Door

Assembly

FP1962

Figure 24 Beveled Surround

Figure 25

 

Cast Surround

FP1934

24

83D0511

Image 24
Contents Ildv Series Direct Vent Gas Fireplace Insert What to do if YOU Smell GASGeneral Installation Information InstallationVent Installation Insert InstallationImportant Safety Information InstallerOwner Never connect unit to private Non-utility gas wells. ThisGas is commonly known as Wellhead gasProduct features and code approval Product SpecificationsListed Vented GAS Fireplace Heater High Elevations Orifice SIZES, Pressures and BTUsBefore You Start ILDV20NV ILDV20PV ILDV30NV ILDV30PVInsert dimensions ILDV20 ILDV30General installation Information Insert ApplicationsClearances Insert ClearancesMantel clearances Hearth RequirementsInsert Placement Installation ZERO-CLEARANCE Metal Fireplace RequirementsVent installation Installation PrecautionsVent Requirements Failure to adjust air shutter properly may lead to improper Combustion which can create a safety hazard. Consult yourDealer or installer if you suspect an improperly adjusted Altitude ConsiderationsVent Configurations Manifold Removal and Installation Remove Manifold and Attach to Flex VentInsert Installation Check gas typeInsert installation Use pipe joint sealant that is resistantTo liquid petroleum LP gas Check GAS Pressure Do not use open flame toCheck for gas leaks Remote Wall mounted Switch Hand Held Remote ControlLog placement Installing Logs and Rock Wool Ember Material in FireboxDo not use the entire bag of rock wool to cover burner area Place Log #6 Place Log #5 Surround installation Install SurroundOperating Instructions What to do if YOU Smell GASInitial lighting Never use an open flame to check for gas leakApproved leak testing method Lighting pilotMain burner switch Lighting the burnerPilot position Adjust the AIR Shutter Glass Frame Removal Glass Frame RemovalBlower Replacement Blower Parts List 20ILDV 30ILDVCleaning and Maintenance Cleaning glassRelight pilot. Refer to Maintenance Replacement Parts Replacement Parts Troubleshooting Observed Problem Possible Cause RemedyILDV20/ILDV30 Fireplace Insert Lifetime Warranty Five Year WarrantyBasic Warranty If Warranty Service is NeededMhsc AFUE%