Napoleon Fireplaces GDS60N manual Adding Vent Sections, More MIN Flat Roof Wall

32

5.7.5 ADDING VENT SECTIONS

Add chimney sections, according to the manufacturers installation instructions. For ease of assembly, a 7” telescoping pipe may be installed over the 4” vent connection of the adapter. Add vent sections, twist locking (clockwise) securely, to the required height. The chimney must extend at least, 3 feet above its point of contact with the roof and at least 2 feet higher than any wall, roof or building within 10 feet horizontally.

		LESS THAN
FIGURE 5.7.5a		10 FEET
	2 FT MIN	2 FT
		RIDGE MIN	3 FT
3 FT	10 FT TO		MIN
MIN	NEAREST
	ROOFLINE

				LESS THAN
10 FT OR					10 FT
MORE
					2	FT
			3 FT
	3	FT	MIN		MIN
	MIN

FLAT ROOF

WALL

59.1

W415-0788 / A / 09.22.09