Napoleon Fireplaces Your Complete Guide to the Napoleon GDS60 Manual for Indoor Fireplaces

34

6.0FINISHING

6.1FRONT CAST REMOVAL

6.1.1Lift the top casting off the unit.

6.1.2Loosen the securing bolts on the cast front (located at either side on the top). Lift up and out.

6.1.3To install the front, repeat in reverse order.

6.2GLASS DOOR INSTALLATION AND REMOVAL

When installing the glass door, a simple procedure must be followed in order to not damage the door.

6.2.1Lift the top casting off.

6.2.2Lift the cast front out of its retainers (located at either side on the top).

6.2.3Open the valve control cover. Pull the latch handles forward to release. The door may now be safely removed by swinging the bottom out and lifting it off. To install the door, repeat in reverse order. The return flange must fit over the top of the ridge so that it rests on top of the firebox.

The 'T' latch portion is threaded and can be loosened or tightened to adjust for an effective door seal. Care must be taken when re-installing the door to ensure that the gasket at the top of the door does not bunch.

RETURN

FLANGE

RIDGE

LATCH

FIGURE 6.2.3a-b

W415-0788 / A / 09.22.09