7. LOUVER CONTROL
1. VERTICAL LOUVER CONTROL
(Function Range)
Each time the button is pressed, the air direction range will change as follow:
Types of Air flow Direction Setting:
,
,
,
: During Cooling/Dry modes
,
,
,
: During Heating
The Remote Controller's display does not change.
Use the air direction adjustments within the ranges shown above.
Fig.8 : Air Direction Range
1 
2
3
4 5 6 7
The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.
Cooling / Dry mode | Horizontal flow |
Heating mode | Downward flow |
If you set the angle to position 
~ 
for more than 30 minutes in Cooling or Dry mode, they automatically return to position 
.
In Cooling or Dry mode, if the angle is set to position 
~ 
for many hours, condensation may be formed, and the drips may wet your property.
2. ADJUST THE RIGHT-LEFT LOUVERS
Move the
Knob
Knob (2 places)
3. SWING OPERATION
To select Vertical Airflow Swing Operation
When the swing signal is received from the remote controller, the vertical louver starts to swing. (Table10 : Swinging Range)
Range
Cooling / Dry mode
Fan mode (
)
Heating mode | ) |
Fan mode ( |
The SWING operation may stop temporarily when the air conditioner’s fan is not operating, or when operating at very low speeds.
To select Horizontal Airflow Swing Operation
(No function)