Bosch Appliances DS7400XIV4-EXP manual Automatic Disarming, Delayed Arming

Page 16

DS7400XiV4-EXP User Guide 6.0 Day to Day Operations

6.2.6Automatic Disarming

EN 16

You can program each area to disarm automatically once per day. You cannot program automatic disarming from an RF (wireless) keypad.

If your program automatic disarming in Master Keypad mode, it affects all areas you have access to. If programmed in single area mode, or from a single area keypad, it affects only the area you are working in.

Do this procedure at a text keypad because no visual clues are provided from an LED keypad.

Table 14: Automatic Disarming

 

 

 

 

Setting the Automatic Disarming Time

 

Notes

 

 

 

 

[Master PIN][#][0]

You can only set the automatic disarming time in Master Programming Mode.

[4]

To enter the automatic disarming setup programming.

 

 

 

 

Enter the area number.

• If you are programming from a Master Keypad that is not in Single Partition

Press [#] to exit.

Mode, you are prompted to enter the area to program.

 

 

• You are allowed to program only the areas to which you are assigned.

 

• If you are programming from a standard keypad or from a Master Keypad in

 

Single Partition Mode, skip this step.

 

Enter a time for each day in

• Programming starts with Sunday. The keypad displays “Sunday –nn : nn”

24-hour clock format

• Enter the time in 24-hour clock format and press the [#] key. If you make a

 

mistake, press the [#] key twice to move back to your last entry.

 

• Time examples:

12 midnight = 2400#

12 noon = 1200#

 

 

12:01 am = 0001#

12:01 pm = 1201#

 

 

1:00 am = 0100#

1:00 pm = 1300#

 

 

Disabled = 0000#

 

6.2.7Delayed Arming

Delayed arming causes the system to arm after a specified number of hours. Delayed arming is not available from RF (wireless) keypads. You can use delayed arming even if there are no automatic arming times programmed. If delayed arming is used in Master Keypad mode, it affects all areas you have access to. If it is used in Single Partition Mode, or from a single area keypad, it affects only the area you are working in.

Delayed arming overrides the automatic arming time. Delayed arming also provides a 15-minute pre- arming period like the one provided with automatic arming.

Table 15: Delayed Arming

 

 

Setting Delayed Arming

Notes

 

 

[PIN][#][9][9]

• To enter the delayed arming setup programming.

 

• The keypad displays:

 

“Arm in nn Hours

 

# to accept”

Enter the number of hours to

Enter the number of hours from the current time that you want the system to wait before

delay arming in [0][1] format.

arming.

 

For example, if it is 3:00pm, and you want the system to arm at 9:30pm, enter [0][6][#]

Bosch Security Systems 6/05 4998154961B

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DS7400XiV4-EXP User GuideContents System Overview Conventions Used in This GuideTips, Notes, Cautions, and Warnings Typographical ConventionsYour alarm system might be partitioned Understanding Areas PartitionsVolume Control Understanding the Text and LED KeypadsKeypad LEDs Status LEDsGeneral Information Understanding RF Keypad and KeyfobsOption and Emergency Keys Standard Operations Day to Day OperationsNormal Arming Perimeter Instant Arming Perimeter Arming PINCustom Arming Maximum Security Arming Normal Disarming Quick Arming Optional OperationsForce Arming Zone Bypass Delaying Automatic Arming Automatic ArmingDelayed Arming Automatic DisarmingAccess Control Chime ModeThis feature can be used in armed or disarmed modes Setting the System Clock Changing the DateEmergency Procedures Fire Safety If Installed in Family ResidencesNo fire detection device or system is 100% foolproof Create and Practice an Escape PlanEmergency Keypad Alarms/ Silencing Alarms Installation ConsiderationsTurning OFF Disarming Your System under Duress Disarming Your System under DuressRemoving a PIN Personal Identification Numbers PINsChanging a PIN Changing the Expiration Date for Temporary PINs PIN Authority LevelsError Displays System FaultsSystem Faults System FaultsZone Test Testing Your SystemTest the system weekly Zone Test Communicator Test Battery TestsCommunicator Test Fire Walk Test Fire Walk TestEvent History Readback Event History ReadbackScrolling through the History Events Text Keypad Only Master Keypad Displays Master Keypad Text Keypad OnlyMaster Keypad LEDs Single Partition Mode Example of Accessing Single Partition ModeArming from the Master Keypad Arming from the Master KeypadDisarming from the Master Keypad Disarming from the Master KeypadGlossary Quick Reference Guide DS7400XiV4-EXP User Guide Quick Reference Guide System Features Reference Guide DS7400XiV4-EXP User Guide Notes DS7400XiV4-EXP User Guide Notes Bosch Security Systems 4998154961B
Top Page Image Contents