Bosch Appliances DS7400XIV4-EXP manual Perimeter Instant Arming

DS7400XiV4-EXP User Guide 6.0 Day to Day Operations

EN 8

6.1.2Perimeter Instant Arming

Use perimeter instant arming to arm only the exterior (perimeter) zones when you remain in the building. An exit delay is in effect, but no entry delay is in effect so an alarm does occur upon entry.

The green Status LED must be lit and, if using a text keypad, “Ready to Arm” must be displayed. If the green LED is not on or the keypad displays “Not Ready,” you must use other methods to arm the system (refer to Section 6.2.2 Force Arming on page 13 or Section 6.2.3 Zone Bypass on page 14).

Table 4: Perimeter Instant Arming

Equipment	Command Sequence	What Happens	What To Do
Text Keypad LED	[PIN][No Entry]	• The red Armed LED flashes.	• Move freely around the
Keypad	[Perimeter Only]	• “Perimeter Inst.” is displayed. *		interior.
		• “Exit Now” is displayed during exit-delay. *	•	Opening any exterior
		• The green Status LED lights steady.		door or window triggers
				an alarm.
		• A single beep sounds.
		• The red Armed LED lights steady when
		the exit-delay period ends.
		• The yellow Perimeter LED lights steady. **
		• Only exterior protection zones are armed.
RF3341 Keypad	[PIN][#][2]	• The LED flashes indicating a signal was	• Move freely around the
		sent to your security system.		interior.
		• Only exterior protection zones are armed.	•	Opening any exterior
				door or window triggers
				an alarm.
RF3332/RF3332E,		Not applicable
RF3334/RF3334E
* Text Keypad only
** LED Keypad only

Bosch Security Systems 6/05 4998154961B