Bosch Appliances DS7400XIV4-EXP manual Testing Your System, Test the system weekly Zone Test

Page 27

DS7400XiV4-EXP User Guide 10.0	Testing Your System

EN 27

10.0Testing Your System

10.1Zone Test

The zone test confirms that detectors report alarms to the keypad. A zone test works on all zones, except 24-hour zones and fire zones. While the keypad is in a zone test, no control panel alarms activate an alarm, except 24-hour zone alarms and fire alarms; these alarms override the zone test function.

This test requires you to manually alarm each zone.

At the start of the test, if programmed, a report is sent to the central station followed by reports on the individual zones as they are tested. When the zone test is complete, a test restoral report is sent to the central station.

If you perform this test from a Master Keypad, the keypad must be in Single Partition Mode. Zone tests are not available from RF (wireless) keypads.

Test the system weekly.

Table 25: Zone Test


Type of Test	Command Sequence	What Happens	What To Do

Zone Test	[PIN][#][8][1]	• “Test Zone” is displayed followed by the	• Test each zone as
		numbers of the zones that were not tested. *	instructed by your
		• The zone LEDs of any untested zones flash. **	installing company.
		• “Now Testing” is displayed followed by the	• Exit the Zone Test using
		number of the zone currently being tested. *	[PIN][#].
		• The LED for the zone currently being tested
		turns on steady. **
		• As each zone is tested, “Test Zone” appears
		followed by the remaining untested zones. *
		• As each zone is tested, its LED turns off. **

*Text Keypad only ** LED Keypad only

Bosch Security Systems 6/05 4998154961B

Image 27

Contents User Guide DS7400XiV4-EXPContents Typographical Conventions System OverviewConventions Used in This Guide Tips, Notes, Cautions, and WarningsUnderstanding Areas Partitions Your alarm system might be partitionedStatus LEDs Volume ControlUnderstanding the Text and LED Keypads Keypad LEDsUnderstanding RF Keypad and Keyfobs General InformationOption and Emergency Keys Day to Day Operations Standard OperationsNormal Arming Perimeter Instant Arming PIN Perimeter ArmingCustom Arming Maximum Security Arming Normal Disarming Optional Operations Quick ArmingForce Arming Zone Bypass Automatic Arming Delaying Automatic ArmingAutomatic Disarming Delayed ArmingChime Mode Access ControlThis feature can be used in armed or disarmed modes Changing the Date Setting the System ClockEmergency Procedures Create and Practice an Escape Plan Fire SafetyIf Installed in Family Residences No fire detection device or system is 100% foolproofInstallation Considerations Emergency Keypad Alarms/ Silencing AlarmsDisarming Your System under Duress Turning OFF Disarming Your System under DuressPersonal Identification Numbers PINs Removing a PINChanging a PIN PIN Authority Levels Changing the Expiration Date for Temporary PINsSystem Faults Error DisplaysSystem Faults System FaultsTesting Your System Zone TestTest the system weekly Zone Test Battery Tests Communicator TestCommunicator Test Fire Walk Test Fire Walk TestEvent History Readback Event History ReadbackScrolling through the History Events Text Keypad Only Master Keypad Text Keypad Only Master Keypad DisplaysMaster Keypad LEDs Arming from the Master Keypad Single Partition ModeExample of Accessing Single Partition Mode Arming from the Master KeypadDisarming from the Master Keypad Disarming from the Master KeypadGlossary Quick Reference Guide DS7400XiV4-EXP User Guide Quick Reference Guide System Features Reference Guide DS7400XiV4-EXP User Guide Notes DS7400XiV4-EXP User Guide Notes Bosch Security Systems 4998154961B