Bosch Appliances DS7400XIV4-EXP manual Normal Disarming

Page 12

DS7400XiV4-EXP User Guide 6.0 Day to Day Operations

EN 12

6.1.6Normal Disarming

Please read Section 7.0 Emergency Procedures on page 19 before you are confronted with an emergency event. If you entered the building through a perimeter door, you might hear a steady entry alert tone from the wired keypads. If so, disarm according to the chart below.

If an alarm occurred sometime before your arrival, one or more of these happens:

•The bells and sirens sound.

•The wired keypads issue a pulsed tone during the entry delay instead of the usual steady tone.

•The red Armed LED on any LED keypad flashes.

•The red Armed LED on any text keypad flashes and “Zone Alarm” is displayed.

If the alarm is not yet investigated, do not enter the building unless accompanied by the appropriate Emergency Services’ personnel.

Table 8: Normal Disarming

 

 

 

 

 

 

 

Equipment

Command Sequence

What Happens

What To Do

 

 

 

 

 

 

 

Text Keypad LED

[PIN][Off]

• The red Armed LED turns off.

• Determine why the sounders, if

 

Keypad

 

• All sounders are silenced.

 

any, were activated.

 

 

 

• All zones are disarmed.

•

Correct the cause.

 

 

 

• A single beep sounds.

• If a fire alarm was sounding,

 

 

 

• If a fire alarm was sounding,

 

correct the cause and press

 

 

 

 

[System Reset] or [#][4][7] to

 

 

 

 

“Sounder Silenced” is displayed until

 

 

 

 

 

 

reset the system.

 

 

 

 

the system is reset. *

 

 

 

 

 

 

 

 

RF3341 Keypad

[PIN][#]

• The LED flashes indicating a signal

• Determine why the sounders, if

 

 

 

was sent to your security system.

 

any, were activated.

 

 

• All sounders are silenced.

•

Correct the cause.

 

 

• All zones are disarmed.

• If a fire alarm was sounding,

 

 

 

 

 

correct the cause and press

 

 

 

 

 

[System Reset] or [#][4][7] to

 

 

 

 

 

reset the system.

 

 

 

 

 

 

RF3332/RF3332E

Press DISARM

• The LED flashes indicating a signal

• Determine why the sounders, if

RF3334/RF3334E

(unlock) button

 

was sent to your security system.

 

any, were activated.

 

 

• All sounders are silenced.

•

Correct the cause.

 

 

• All zones are disarmed.

• If a fire alarm was sounding,

 

 

 

 

 

correct the cause and press

 

 

 

 

 

[System Reset] or [#][4][7] to

 

 

 

 

 

reset the system.

* Text Keypad only

Note: When in Commercial Fire Mode, enter [PIN][#] a second time on a text or LED keypad to

 

locate the fire zone number(s) in alarm.

 

 

 

Bosch Security Systems 6/05 4998154961B

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DS7400XiV4-EXP User GuideContents System Overview Conventions Used in This GuideTips, Notes, Cautions, and Warnings Typographical ConventionsYour alarm system might be partitioned Understanding Areas PartitionsVolume Control Understanding the Text and LED KeypadsKeypad LEDs Status LEDsUnderstanding RF Keypad and Keyfobs General InformationOption and Emergency Keys Day to Day Operations Standard OperationsNormal Arming Perimeter Instant Arming Perimeter Arming PINCustom Arming Maximum Security Arming Normal Disarming Optional Operations Quick ArmingForce Arming Zone Bypass Delaying Automatic Arming Automatic ArmingDelayed Arming Automatic DisarmingChime Mode Access ControlThis feature can be used in armed or disarmed modes Setting the System Clock Changing the DateEmergency Procedures Fire Safety If Installed in Family ResidencesNo fire detection device or system is 100% foolproof Create and Practice an Escape PlanEmergency Keypad Alarms/ Silencing Alarms Installation ConsiderationsTurning OFF Disarming Your System under Duress Disarming Your System under DuressPersonal Identification Numbers PINs Removing a PINChanging a PIN Changing the Expiration Date for Temporary PINs PIN Authority LevelsError Displays System FaultsSystem Faults System FaultsTesting Your System Zone TestTest the system weekly Zone Test Battery Tests Communicator TestCommunicator Test Fire Walk Test Fire Walk TestEvent History Readback Event History ReadbackScrolling through the History Events Text Keypad Only Master Keypad Text Keypad Only Master Keypad DisplaysMaster Keypad LEDs Single Partition Mode Example of Accessing Single Partition ModeArming from the Master Keypad Arming from the Master KeypadDisarming from the Master Keypad Disarming from the Master KeypadGlossary Quick Reference Guide DS7400XiV4-EXP User Guide Quick Reference Guide System Features Reference Guide DS7400XiV4-EXP User Guide Notes DS7400XiV4-EXP User Guide Notes Bosch Security Systems 4998154961B
Top Page Image Contents