Bosch Appliances DS7400XIV4-EXP manual Event History Readback

Page 30

DS7400XiV4-EXP User Guide 10.0

Testing Your System

 

 

EN 30

10.5Event History Readback

The History Buffer stores the last 400 events in memory. The text keypad can display all of these events. The LED keypad only displays the zones (1 to 16) that alarmed since the last Event History Readback. If you perform this test from a Master keypad, the keypad must be in Single Partition Mode. The RF3341 keypad cannot display history events.

Table 29: Event History Readback

 

 

 

 

Type of Test

Command Sequence

What Happens

What To Do

 

 

 

 

Event History

[PIN][#][8][9]

• The last event to take place is displayed. *

• Scroll through the events

Readback

 

• The zone LEDs flash for any zones that alarmed

using the [9], [6], and [#]

 

 

since the last Event History Readback. **

keys. *

 

 

Note: To read the System Error Displays, follow the

• Exit from Event History

 

 

instructions in Section 9.0 Error Displays.

using [PIN][#].

* Text keypad only

** LED keypad only

 

Scrolling through the History Events (Text Keypad Only)

Press [#] to scroll back through the history line by line.

Press [9] to scroll in reverse chronological order by event.

Press [6] to scroll back through the events (toward the most recent) by event.

Each event consists of two or three lines or display screens. The first line/screen is the event title and user. The second line/screen is the date of the event or the change being made. If there is a third line/screen, it will be the date of the change.

To exit the Event History Mode, press the [*] key or wait 20 seconds and the keypad exits automatically.

When performing Event History Readback from a Master keypad, each area displays its own history.

Bosch Security Systems 6/05 4998154961B

Page 29 Page 31
Image 30
Page 29 Page 31
Contents DS7400XiV4-EXP User GuideContents Tips, Notes, Cautions, and Warnings System OverviewConventions Used in This Guide Typographical ConventionsYour alarm system might be partitioned Understanding Areas PartitionsKeypad LEDs Volume ControlUnderstanding the Text and LED Keypads Status LEDsUnderstanding RF Keypad and Keyfobs General InformationOption and Emergency Keys Day to Day Operations Standard OperationsNormal Arming Perimeter Instant Arming Perimeter Arming PINCustom Arming Maximum Security Arming Normal Disarming Optional Operations Quick ArmingForce Arming Zone Bypass Delaying Automatic Arming Automatic ArmingDelayed Arming Automatic DisarmingChime Mode Access ControlThis feature can be used in armed or disarmed modes Setting the System Clock Changing the DateEmergency Procedures No fire detection device or system is 100% foolproof Fire SafetyIf Installed in Family Residences Create and Practice an Escape PlanEmergency Keypad Alarms/ Silencing Alarms Installation ConsiderationsTurning OFF Disarming Your System under Duress Disarming Your System under DuressPersonal Identification Numbers PINs Removing a PINChanging a PIN Changing the Expiration Date for Temporary PINs PIN Authority LevelsError Displays System FaultsSystem Faults System FaultsTesting Your System Zone TestTest the system weekly Zone Test Battery Tests Communicator TestCommunicator Test Fire Walk Test Fire Walk TestEvent History Readback Event History ReadbackScrolling through the History Events Text Keypad Only Master Keypad Text Keypad Only Master Keypad DisplaysMaster Keypad LEDs Arming from the Master Keypad Single Partition ModeExample of Accessing Single Partition Mode Arming from the Master KeypadDisarming from the Master Keypad Disarming from the Master KeypadGlossary Quick Reference Guide DS7400XiV4-EXP User Guide Quick Reference Guide System Features Reference Guide DS7400XiV4-EXP User Guide Notes DS7400XiV4-EXP User Guide Notes Bosch Security Systems 4998154961B
Top Page Image Contents