Bosch Appliances DS7400XIV4-EXP manual Perimeter Arming, Pin

Page 9

DS7400XiV4-EXP User Guide 6.0 Day to Day Operations

EN 9

6.1.3Perimeter Arming

Perimeter arming is used when someone is still in the building, only the exterior (perimeter) zones must be armed, and an entry/exit delay is in effect.

The green Status LED must be lit and, if using a text keypad, “Ready to Arm” must be displayed. If the green LED is not on or the keypad displays “Not Ready,” you must use other methods to arm the system (refer to Section 6.2.2 Force Arming on page 13 or Section 6.2.3 Zone Bypass on page 14).

Table 5: Perimeter Arming


Equipment	Command Sequence	What Happens		What To Do

Text Keypad LED	[PIN]	• The red Armed LED flashes.		• Move freely around the
Keypad	[Perimeter Only]	• “Perimeter On” is displayed. *		interior.
		• “Exit Now” is displayed during exit-delay.		• Opening any exterior door
		*		or window triggers an
		• The green Status LED lights steady.		alarm.
		• The green Status LED lights steady.
		• A single beep sounds.
		• The red Armed LED lights steady when
		the exit-delay period ends.
		• The yellow Perimeter LED lights steady.
		**
		• Only exterior protection zones are
		armed.
RF3341 Keypad	[PIN][#][3]	• The LED flashes indicating a signal was		• Move freely around the
		sent to your security system.		interior.
		• Only exterior protection zones are		• Opening any exterior door
		armed.		or window triggers an
				alarm.
RF3332/RF3332E,			Not applicable
RF3334/RF3334E
* Text Keypad only
** LED Keypad only

Bosch Security Systems 6/05 4998154961B

Image 9

Contents User Guide DS7400XiV4-EXPContents Conventions Used in This Guide System OverviewTips, Notes, Cautions, and Warnings Typographical ConventionsUnderstanding Areas Partitions Your alarm system might be partitionedUnderstanding the Text and LED Keypads Volume ControlKeypad LEDs Status LEDsUnderstanding RF Keypad and Keyfobs General InformationOption and Emergency Keys Day to Day Operations Standard OperationsNormal Arming Perimeter Instant Arming PIN Perimeter ArmingCustom Arming Maximum Security Arming Normal Disarming Optional Operations Quick ArmingForce Arming Zone Bypass Automatic Arming Delaying Automatic ArmingAutomatic Disarming Delayed ArmingChime Mode Access ControlThis feature can be used in armed or disarmed modes Changing the Date Setting the System ClockEmergency Procedures If Installed in Family Residences Fire SafetyNo fire detection device or system is 100% foolproof Create and Practice an Escape PlanInstallation Considerations Emergency Keypad Alarms/ Silencing AlarmsDisarming Your System under Duress Turning OFF Disarming Your System under DuressPersonal Identification Numbers PINs Removing a PINChanging a PIN PIN Authority Levels Changing the Expiration Date for Temporary PINsSystem Faults Error DisplaysSystem Faults System FaultsTesting Your System Zone TestTest the system weekly Zone Test Battery Tests Communicator TestCommunicator Test Fire Walk Test Fire Walk TestEvent History Readback Event History ReadbackScrolling through the History Events Text Keypad Only Master Keypad Text Keypad Only Master Keypad DisplaysMaster Keypad LEDs Example of Accessing Single Partition Mode Single Partition ModeArming from the Master Keypad Arming from the Master KeypadDisarming from the Master Keypad Disarming from the Master KeypadGlossary Quick Reference Guide DS7400XiV4-EXP User Guide Quick Reference Guide System Features Reference Guide DS7400XiV4-EXP User Guide Notes DS7400XiV4-EXP User Guide Notes Bosch Security Systems 4998154961B