Bosch Appliances D9412GV3 Installing the Point Chart Label, Testing the System, Service Walk Test

Page 18

D9412GV3/D7412GV3 Operation and Installation Guide

4.0

Installation

 

 

 

4.8Installing the Point Chart Label

The point chart label is required for fire systems with verifications points.

A point chart label is included in the literature pack. Install the point chart label for fire or combined fire- and-burglary systems that use verification points.

Use the D9412GV3/D7412GV3 Program Record Sheet (P/N: F01U170809) to gather the necessary information for completing the point chart. Fill out the label and install it on the inside of the enclosure door (refer to Figure 2 on page 15).

Avoid smearing the entries on the chart. Use the peel-off backing to press the label in place.

4.9Testing the System

After installing and programming the control panel, test the system completely. Test the control panel and all devices for proper operation.

Test after initially programming the control panel.

To meet UL 864 requirements, perform a full system test after any subsequent programming session.

Refer to Section 4.10 Service Walk Test on page 18 for complete Service Walk Test instructions.

Clear after Test: To clear the event memory and report buffer, momentarily close the reset pin. Events stored in the control panel’s event log are not cleared.

4.10Service Walk Test

The Service Walk Test differs from the standard Walk Test. In the standard Walk Test, POPITs whose switches are set for a point number not programmed in the control panel do not appear in the test. In the Service Walk Test, POPITs whose switches are set for a point number that is not programmed in the control panel do appear in the test.

The Service Walk Test allows a user to walk test all 246 points from a control-panel-wide keypad, regardless of the point index type.

A Service Walk Test can also be initiated by account- wide or area-wide keypads but test only those points that are within the scope of the keypad that initiated the function. The Service Walk Test does not test points in armed areas.

Only Walk Test Start and Walk Test End are reported to the central station.

The D9131A can be configured for local printing. Refer to the D9412GV3/ D7412GV3 Program Entry Guide (P/N: F01U170807).

During a Service Walk Test, the summary alarm and summary fire remain off, because there are no Fire or Burg alarm conditions to summarize. The P# Relay Response Type feature operates as programmed.

Service Walk Test Procedure.

Refer to Figure 5 on page 20 and Figure 6 on page 21 for Service Walk Test options. Refer to the Walk Test procedures in the GV3 Series Owner’s Manual Supplement (P/N: F01U143082) when using a D1260 or D1260B Keypad.

1.Choose a keypad to conduct the test. Ensure that the display shows the idle disarmed text.

2.Press the [MENU] key to enter the Function List. Press [NEXT] repeatedly until the SERVICE WALK ? prompt appears.

3.Press [ENT], or press [9][9] followed by [ENT] to reach the Service Menu to access the Service Walk Test.

The D7412GV3 does not include the Service Walk Test in the Service Menu. Enabling the Service Walk Test function in the Function List provides access to the Service Walk Test in the D9412GV3.

4.The display shows ### PTS TO TEST .Test the first detection device.

5.When a detection device is faulted, the keypad emits a brief tone and displays the point text of the point tested for 60 sec. After 60 sec, the display returns to the ### PTS TO TEST message.

Extra Points display default text: If the switches on a POPIT are set incorrectly to a point number that is not in the program for the control panel, the default text for that point number (PT ###) appears when the point is faulted. Refer to the control panel’s program record sheet for the default text for all points.

Faulting the point a second time produces the tone and shows the point text, but does not decrease the count in the ## PTS TO TEST message.

Bosch Security Systems, Inc. 10/10 F01U143070-03

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents D9412GV3/D7412GV3 Listings and Approvals TrademarksCertifications and Approvals Federal Communications Commission FCC RulesService Center in USA FCC Registration NumberRinger Equivalence 0.0B Contents Programmer and Accessory Connections Appendix a System Wiring Diagrams, Issue aAppendix B Point Address Charts Tables Introduction Related DocumentationPrecautions during Installation Lightning StrikesEffects Overview Configuration and PartsFeatures D9412GV3 D7412GV3 GV3 Series Control Panel DifferencesLiterature Pack Parts ListAssembly Parts Available by Separate OrderAccessories Compatible Accessories1Model Title Fire Intrusion Features in the D9412GV3 and D7412GV3 Ground Fault Detection KeyswitchAccess Control KeypadsEnclosure Options InstallationInstallation Preparation Mounting EnclosureGround Fault Detect Enable Installing the Control PanelConnecting Earth Ground TerminalGround Fault Impedance Specifications Enabling Ground Fault DetectionGround Fault Specifications Locking the Reset PinCompleting the Installation Programming the Control PanelService Walk Test Installing the Point Chart LabelTesting the System Service Walk Test ProcedureD9412GV3/D7412GV3 Operation and Installation Guide Bosch Security Systems, Inc /10 F01U143070-03 Test a deviceText displays for 60 seconds D7412GV3 Service Walk Test Flow Chart Power Supply Primary Power Terminals 1Secondary Power Terminals Non-Power-Limited Wiring Investigate Low Battery reports immediately If Replacing the Battery Charging and Battery LEDsD8132 Boost Battery Backup Adding a D8132 Battery Charging CircuitDischarge Cycle Battery Discharge and Recharge ScheduleCharging Status and Low Battery LEDs Recharge CycleContinuous Power Output Terminals 3, 8, 24, Power OutputsTotal Available Power Circuit ProtectionA  NSC current = Alarm current Required Step Available Programmable Power Output Terminals 6, 7,Verification and Reset Relay Voltage Output at Terminals 6, 7,Notification Telephone ConnectionsRegistration LocationDialing Format Phone LED RedOperation Monitor LED Green Telephone Line Monitor11 D928 Dual Phone Line Switcher DescriptionOn-Board Points Terminals 11 to 22 DescriptionPoint Sensor Loops Point Parameters Point ParametersLoop Voltage Range Point Response Time 64 mm 1/4 Minimum distance Comm Off-Board Points Point Zonex Bus D9412GV3 Terminals and D7412GV3D8125 and D9127 Popit Modules Off-Board Point ErrorsError Condition Result Additional Information 5 D9412GV3/D7412GV3 Responses to Missing Point ConditionsConnecting the D8125 Popex to the D9412GV3 Control Panel Connecting the D8125 Popex to the D7412GV3 Control Panel Installing the D8125 Popex Module Popit Module Point Assignments Wiring Data Expansion Loops to Popex ModulesPopit Sensor Loops Program Record SheetD8128D OctoPOPIT Module Program Record Sheet Popit LabelsRequirements for Fire Initiation Applications D8128D OctoPOPIT LayoutAddress Switches InstallationSetting the OctoPOPIT Switches D8128D OctoPOPIT Switch Settings for D9412GV3 and D7412GV3Mounting OctoPOPITs Wiring OctoPOPITsUsing the Terminal Strip Terminal Strip ConnectionsConnecting D8128D OctoPOPITs to the D9412GV3 Connecting D8128D OctoPOPITs to the D7412GV3 Using Molex Connectors Wiring Multiple D8128Ds Using Molex ConnectorsTesting Off-Board Points OctoPOPIT Sensor LoopsOff-Board Relays 10.1 D8129 OctoRelayConfiguring the D8129 OctoRelay D8129 OctoRelay Switch SettingsRelay Outputs Wiring Connections 10.2 D811 Arm Status Relay ModuleNumber of D8128Ds Used with D8129s D811 Module Wiring to the D9412GV3 D811 Module Wiring to the D7412GV3 Description Keypad Address SettingsArming Devices Keypad Terminals 29 toD9412GV3 Keypad D7412GV3 Function Wire Terminal Color Wire Limits for Individual DevicesExtra Power for More Keypads Keypad ConnectionsKeyswitch 11.3 D279A Independent Zone ControlOperation Maintained Contact Momentary Contact Silencing the BellInstallation SDI Devices12.3 D9131A Parallel Printer Interface Module 12.4 D9210B Wiegand Control Interface Module SDI Addresses 88Address Settings Network Interface ModulesSupervision Installer Keypad and Local Programmers Mode Programmer and Accessory ConnectionsProgrammer Connector Programmer Access ReportsAccessory Connector Accessory connector Programming connectorFaceplates 14.1 D9412GV3 Faceplate14.2 D7412GV3 Faceplate D7412GV3 FaceplateAppendix a System Wiring Diagrams, Issue a D9412GV3 Control PanelD9412GV3 D9412GV3, SDI Devices System Wiring System Wiring D7412GV3, Power Supply Side System Wiring D7412GV3 Control PanelD7412GV3 D7412GV3, SDI Devices System Wiring Appendix B Point Address Charts Zonex 1 Point Address ChartZonex 2 Point Address Chart Zonex 2, Points 129 to 247 D9412GV3 OnlySpecifications Power SupplyD9412GV3/D7412GV3 Operation and Installation Guide Notes Bosch Security Systems, Inc
Related manuals
Manual 154 pages 49.97 Kb

D9412GV3, D7412GV3 specifications

The Bosch Appliances D9412GV3 is a perfect blend of functionality and innovation, designed to meet the needs of modern households. This dishwasher is part of Bosch's reputation for creating high-quality, energy-efficient home appliances. With a sleek design and advanced technology, the D9412GV3 stands out in the crowded market of dishwashers.

One of the main features of the D9412GV3 is its remarkable efficiency. With an Energy Star rating, this model is designed to minimize water and energy consumption while still delivering exceptional cleaning performance. The EcoSense technology optimizes water usage, ensuring every wash cycle is both effective and economical, making it a responsible choice for energy-conscious consumers.

The dishwasher offers a spacious interior, capable of accommodating large loads. Its flexible rack system includes adjustable tines and folding platforms, making it easy to fit various dish sizes, from pots and pans to delicate glassware. Additionally, the third rack feature provides extra space for utensils and smaller items, enhancing its capacity and versatility.

In terms of cleaning power, the D9412GV3 is equipped with the PrecisionWash system. This cutting-edge technology features intelligent sensors that continuously scan and check the load, adjusting the wash cycle as needed for optimal results. Coupled with the 40 dBA noise level, it ensures that the dishwasher operates quietly in the background, so you can enjoy your home without disruptive sounds.

Another standout characteristic is the PureDry technology, an integrated drying system that uses a condensation process to gently dry dishes without the need for extra heat. This not only protects sensitive items but also saves energy, further enhancing the appliance's eco-friendly nature.

Ease of use is a priority for Bosch, as seen in the D9412GV3's user-friendly controls. The intuitive interface allows for selecting various wash cycles and options, including Heavy, Auto, and Quick options, catering to different cleaning needs. Additionally, the Time Delay feature provides the flexibility to set the dishwasher to run at a later time, great for aligning with your schedule.

In summary, the Bosch D9412GV3 combines innovative technologies with a user-centered design to deliver a top-tier dishwasher experience. Its energy-efficient operation, spacious interior, and advanced cleaning features make it an excellent choice for any kitchen, ensuring spotless dishes with minimal effort. With Bosch's commitment to quality, the D9412GV3 stands as a reliable and stylish addition to any modern home.
Top Page Image Contents