Bosch Appliances D7412GV3 manual Configuring the D8129 OctoRelay, D8129 OctoRelay Switch Settings

Page 51

D9412GV3/D7412GV3 Operation and Installation Guide 10.0 Off-Board Relays

Figure 25: D8129 Connections to the D7412GV3

1 - D8129 OctoRelays for relay numbers 1 to 64.

2 - Power limited

Connect OctoRelays in parallel.

 

10.1.1 Configuring the D8129 OctoRelay

Five switches on the OctoRelay determine the relay numbers for the eight relay outputs (Table 17).

Table 17: D8129 OctoRelay Switch Settings

 

 

 

Panel

D8129 OctoRelay

On Panel, Connect

Relay

Switch Setting

D8129 to:

Number

 

 

1 to 8

Off-On-On-On-On

Zonex 1 Terminal 28

9 to 16

On-Off-On-On-On

Zonex 1 Terminal 28

17 to 24

Off-Off-On-On-On

Zonex 1 Terminal 28

25 to 32

On-On-Off-On-On

Zonex 1 Terminal 28

33 to 40

Off-On-Off-On-On

Zonex 1 Terminal 28

41 to 48

On-Off-Off-On-On

Zonex 1 Terminal 28

49 to 56

Off-Off-Off-On-On

Zonex 1 Terminal 28

57 to 64

On-On-On-Off-On

Zonex 1 Terminal 28

D7412G Maximum

10.1.2 Relay Outputs

Relay outputs can activate when you are setting the OctoRelay switches or programming the control panel.

Disconnect equipment connected to relay outputs when you perform these functions.

Each OctoRelay output provides a Form C dry contact rated for 1.0 A at 12.0 VDC. Normally-open, common, and normally-closed terminals are available for each relay output. When an individual output is activated, continuity exists between the normally-open and common terminals. When the output is not activated, continuity exists between the normally-closed and common terminals.

10.1.3 Installation

Set the switches on the OctoRelay before installing it

65 to 72

73 to 80

81 to 88

89 to 96

97 to 104

105 to 112

113 to 120

121 to 128

Off-On-On-On-On

On-Off-On-On-On

Off-Off-On-On-On

On-On-Off-On-On

Off-On-Off-On-On

On-Off-Off-On-On

Off-Off-Off-On-On

On-On-On-Off-On

Zonex 2 Terminal 26

Zonex 2 Terminal 26

Zonex 2 Terminal 26

Zonex 2 Terminal 26

Zonex 2 Terminal 26

Zonex 2 Terminal 26

Zonex 2 Terminal 26

Zonex 2 Terminal 26

in the enclosure. Refer to Section 10.1.1 Configuring the D8129 OctoRelay.

Install the OctoRelay in the enclosure with the control panel (Figure 2 on page 9) or in an adjacent enclosure that is no more than 1.5 m (5 ft.) from the control panel. Use 1.5 mm (16 AWG) to 0.8 mm

(22 AWG) wire.

To install OctoRelays in the enclosure with the control panel:

Bosch Security Systems, Inc. 10/10 F01U143070-03

51

Image 51
Contents D9412GV3/D7412GV3 Federal Communications Commission FCC Rules TrademarksCertifications and Approvals Listings and ApprovalsService Center in USA FCC Registration NumberRinger Equivalence 0.0B Contents Programmer and Accessory Connections Appendix a System Wiring Diagrams, Issue aAppendix B Point Address Charts Tables Related Documentation IntroductionPrecautions during Installation Lightning StrikesEffects GV3 Series Control Panel Differences Configuration and PartsFeatures D9412GV3 D7412GV3 OverviewParts Available by Separate Order Parts ListAssembly Literature PackAccessories Compatible Accessories1Model Title Fire Intrusion Features in the D9412GV3 and D7412GV3 Keypads KeyswitchAccess Control Ground Fault DetectionMounting Enclosure InstallationInstallation Preparation Enclosure OptionsTerminal Installing the Control PanelConnecting Earth Ground Ground Fault Detect EnableLocking the Reset Pin Enabling Ground Fault DetectionGround Fault Specifications Ground Fault Impedance SpecificationsProgramming the Control Panel Completing the InstallationService Walk Test Procedure Installing the Point Chart LabelTesting the System Service Walk TestD9412GV3/D7412GV3 Operation and Installation Guide Bosch Security Systems, Inc /10 F01U143070-03 Test a deviceText displays for 60 seconds D7412GV3 Service Walk Test Flow Chart Power Supply Primary Power Terminals 1Secondary Power Terminals Non-Power-Limited Wiring Battery Charging Circuit Replacing the Battery Charging and Battery LEDsD8132 Boost Battery Backup Adding a D8132 Investigate Low Battery reports immediately IfRecharge Cycle Battery Discharge and Recharge ScheduleCharging Status and Low Battery LEDs Discharge CycleCircuit Protection Power OutputsTotal Available Power Continuous Power Output Terminals 3, 8, 24,Voltage Output at Terminals 6, 7, Programmable Power Output Terminals 6, 7,Verification and Reset Relay A  NSC current = Alarm current Required Step AvailableLocation Telephone ConnectionsRegistration NotificationTelephone Line Monitor Phone LED RedOperation Monitor LED Green Dialing FormatDescription 11 D928 Dual Phone Line SwitcherOn-Board Points Terminals 11 to 22 DescriptionPoint Sensor Loops Point Parameters Point ParametersLoop Voltage Range Point Response Time 64 mm 1/4 Minimum distance Comm Point Zonex Bus D9412GV3 Terminals and D7412GV3 Off-Board Points5 D9412GV3/D7412GV3 Responses to Missing Point Conditions Off-Board Point ErrorsError Condition Result Additional Information D8125 and D9127 Popit ModulesConnecting the D8125 Popex to the D9412GV3 Control Panel Connecting the D8125 Popex to the D7412GV3 Control Panel Installing the D8125 Popex Module Program Record Sheet Wiring Data Expansion Loops to Popex ModulesPopit Sensor Loops Popit Module Point AssignmentsProgram Record Sheet Popit Labels D8128D OctoPOPIT ModuleD8128D OctoPOPIT Layout Requirements for Fire Initiation ApplicationsD8128D OctoPOPIT Switch Settings for D9412GV3 and D7412GV3 InstallationSetting the OctoPOPIT Switches Address SwitchesTerminal Strip Connections Wiring OctoPOPITsUsing the Terminal Strip Mounting OctoPOPITsConnecting D8128D OctoPOPITs to the D9412GV3 Connecting D8128D OctoPOPITs to the D7412GV3 Wiring Multiple D8128Ds Using Molex Connectors Using Molex ConnectorsOctoPOPIT Sensor Loops Testing Off-Board Points10.1 D8129 OctoRelay Off-Board RelaysConfiguring the D8129 OctoRelay D8129 OctoRelay Switch SettingsRelay Outputs Wiring Connections 10.2 D811 Arm Status Relay ModuleNumber of D8128Ds Used with D8129s D811 Module Wiring to the D9412GV3 D811 Module Wiring to the D7412GV3 Keypad Terminals 29 to Keypad Address SettingsArming Devices DescriptionKeypad Connections Wire Limits for Individual DevicesExtra Power for More Keypads D9412GV3 Keypad D7412GV3 Function Wire Terminal ColorKeyswitch 11.3 D279A Independent Zone ControlOperation Maintained Contact Silencing the Bell Momentary ContactInstallation SDI Devices12.3 D9131A Parallel Printer Interface Module SDI Addresses 88 12.4 D9210B Wiegand Control Interface ModuleAddress Settings Network Interface ModulesSupervision Programmer Access Reports Programmer and Accessory ConnectionsProgrammer Connector Installer Keypad and Local Programmers ModeAccessory connector Programming connector Accessory Connector14.1 D9412GV3 Faceplate FaceplatesD7412GV3 Faceplate 14.2 D7412GV3 FaceplateD9412GV3 Control Panel Appendix a System Wiring Diagrams, Issue aD9412GV3 D9412GV3, SDI Devices System Wiring System Wiring D7412GV3 Control Panel D7412GV3, Power Supply Side System WiringD7412GV3 D7412GV3, SDI Devices System Wiring Zonex 1 Point Address Chart Appendix B Point Address ChartsZonex 2, Points 129 to 247 D9412GV3 Only Zonex 2 Point Address ChartPower Supply SpecificationsD9412GV3/D7412GV3 Operation and Installation Guide Notes Bosch Security Systems, Inc
Related manuals
Manual 154 pages 49.97 Kb

D9412GV3, D7412GV3 specifications

The Bosch Appliances D9412GV3 is a perfect blend of functionality and innovation, designed to meet the needs of modern households. This dishwasher is part of Bosch's reputation for creating high-quality, energy-efficient home appliances. With a sleek design and advanced technology, the D9412GV3 stands out in the crowded market of dishwashers.

One of the main features of the D9412GV3 is its remarkable efficiency. With an Energy Star rating, this model is designed to minimize water and energy consumption while still delivering exceptional cleaning performance. The EcoSense technology optimizes water usage, ensuring every wash cycle is both effective and economical, making it a responsible choice for energy-conscious consumers.

The dishwasher offers a spacious interior, capable of accommodating large loads. Its flexible rack system includes adjustable tines and folding platforms, making it easy to fit various dish sizes, from pots and pans to delicate glassware. Additionally, the third rack feature provides extra space for utensils and smaller items, enhancing its capacity and versatility.

In terms of cleaning power, the D9412GV3 is equipped with the PrecisionWash system. This cutting-edge technology features intelligent sensors that continuously scan and check the load, adjusting the wash cycle as needed for optimal results. Coupled with the 40 dBA noise level, it ensures that the dishwasher operates quietly in the background, so you can enjoy your home without disruptive sounds.

Another standout characteristic is the PureDry technology, an integrated drying system that uses a condensation process to gently dry dishes without the need for extra heat. This not only protects sensitive items but also saves energy, further enhancing the appliance's eco-friendly nature.

Ease of use is a priority for Bosch, as seen in the D9412GV3's user-friendly controls. The intuitive interface allows for selecting various wash cycles and options, including Heavy, Auto, and Quick options, catering to different cleaning needs. Additionally, the Time Delay feature provides the flexibility to set the dishwasher to run at a later time, great for aligning with your schedule.

In summary, the Bosch D9412GV3 combines innovative technologies with a user-centered design to deliver a top-tier dishwasher experience. Its energy-efficient operation, spacious interior, and advanced cleaning features make it an excellent choice for any kitchen, ensuring spotless dishes with minimal effort. With Bosch's commitment to quality, the D9412GV3 stands as a reliable and stylish addition to any modern home.