Barnett Engineering ARU CV2 instruction manual Telephone, Options

Page 43

Specifications	6-1
Alarm Groups	• Alarms can be assigned to one of 8 groups. All alarms in
	a group use the same directory when calling out.
Shifts	• Up to 4 shifts can be used. The current setting of the shift
	instructs a group to use one of the six directories.
Interval Timer	• Two-stage timer which uses the short interval several
	times before switching to a long interval. Short and long
	intervals are adjustable from 1 to 249 minutes; the short
	timer can be used from 1 to 9 times.
Acknowledge Code	• Stops the transmission cycle when received. 1 to 7
	DTMF digits with individual codes allowed for each
	group.
Interrogate Code	• Forces annunciation of all active alarms; analog levels,
	totalizer readings and interval timers. 1 to 7 DTMF digits
	with individual codes allowed for each group.

5.3 Telephone
Directory Structure	• Up to 20 numbers in each of the 6 directories; each
	directory can hold up to 200 digits.
Access	• Multiple methods of security are available to restrict
	access and to control the unit.

5.4 Options
Packaged model	• NEMA 4 enclosure
	• Battery-backed power supply
	• Programming and callout telephone set

B1272M001

BARNETT ENGINEERING LTD.

ProTalk Cv2

Image 43

Contents 1272M001 3UR7DONContents Cv2 Capabilities What constitutes an alarm?Way in which the Cv2 processes alarms is shown in Figure How are alarms processed?What actions should occur when an alarm is detected? How do you want to respond to an alarm call? What do you want the Cv2 to do when you call it? What if an alarm is not acknowledged?Sending remote control commands Troubleshooting IndicatorsAre the inputs connected properly? Mounting Antenna requirementsPackaged model Input port connections Ground closure alarm signalStand-alone model 3 +5 volt alarm signal 2 +12 volt alarm signalAnalog input Output port connections Configuration programming connectionStand-alone Cv2 PC requirements Installing the programStarting the configuration program Desktop and how to access programming functionsGroups File OperationsHardware GeneralHardware section Configuring the Cv2Directories ProgrammingInterval Input Watchdog InputTotalizer Input Timed Output On/Off OutputPoints section Using Group Common Settings for Points Port SelectionPoint Name Dtmf Tag EnabledAlarm State Digital and Watchdog PointsUnits Clear CodeAnalog Point Binary Values CalibrateDecimal Values On/Off Output Point HysteresisDtmf On Code Timed Output Point Dtmf Off CodeGroup section Acknowledge Code Enable This GroupEnable Auto Ack Group NameLong Timer Enable Ack RequestTimers Short TimerAcknowledge Received Alarm ActiveNew Alarm Special Function OutputsWait DialAnswer Auto AckAlert VoiceSite Name SignalAccess Code DeleteTemporary Acknowledge Time Shift Change CodeCall Progress Voice Messages Configuration DataVocabulary Access SetupCommands Dial Cv2 Site ID is Ajax Compressor Station Cv2 Electrical on or Electrical OFF Telset Programming Summary Exit Record Points Query NAM Programmable Features SpecificationsOptions TelephoneWarranty