BT VP1000 manual Completing Installation

Page 14

BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725

Step 5 – Completing Installation

INPUTTING YOUR PROPERTY

IDENTIFICATION NUMBER

In the previous step, you will have received your Property ID Number. This should now be input into your BT Home Monitor VP1000 Control Panel. You will need to:

PRESS

DISPLAY

NEXT

Until the display shows

SHOW / OK

SYSTEM PROFILE.

Enter default PIN 2580.

 

NEXT

Until display shows

 

COMMS SETTINGS.

SHOW / OK

 

NEXT

Until display shows

SHOW / OK

PROPERTY ID NO.

Insert your Property ID.

SHOW / OK

 

HOME

Twice then <OK> to return to

 

READY.

SHOW / OK

 

 

 

CONNECTING YOUR TELEPHONE LINE

Now take the Phone Cable and insert the clear jack into the back of the Control Panel. Insert the doubler into your telephone socket. Fig 12.

Fig 12

Phone cable

WALL MOUNTING THE CONTROL PANEL

The wall mounting bracket for your Control Panel is secured in place with a screw to avoid damage and the setting off of tamper alerts.

To release the Control Panel bracket:

Flip open the cover to the Control Panel buttons.

Gently release and remove the battery cover which is alongside using a screwdriver. Fig 13.

Remove the screw which holds the bracket in place. Fig 14.

Fig 13.

 

Fig 14.

 

 

Screw

 

 

• Turn the panel over and push the bracket

 

 

downward to release. Fig 15.

 

SECTION2

 

 

 

• Lift the bracket arms and detach from panel.

Fig 15.

Using the bracket as a guide, mark the mounting surface with the three drilling holes which can be found on the left, right and bottom of the bracket.

The large circle in the bracket is for the tamper retainer washer, which is a fourth hole which needs to be marked. Fig 16.

Fig 16.

The tamper retainer washer can be found in the mounting equipment and needs to be inserted into the large circle and then screwed to the bracket and the wall.

Drill the four holes.

Insert wall plugs and fasten the bracket to the mounting surface with the screws provided.

You can now slot the Control Panel into

the bracket.

13

Image 14
Contents BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 2601 04 ~ User GuideContents Introduction Key FeaturesGetting Started Overview Inside the Box Installing Your BT Home Monitor VP1000System Requirements Insert the rechargeable battery pack. Fig Connecting the PowerActivating the Battery Activating Control PanelDefault Settings Installing Wireless SensorsLocating the Wireless Sensors BT Home Monitor VP1000 package is set-up as followsMounting Using Adhesive Installing the Magnetic ContactTo install the Magnetic Contact, follow these instructions LocatingRemove the cover by unscrewing the closure screw. Fig Mounting Using ScrewsInstalling the Movement Detector Gently pull apart the base from the coverTips On Effective Positioning Another 7 Keyfobs can be registered to your Control Panel Remove the front cover using a screwdriverInstalling the Keyfob Activating the KeyfobRegistering For Your BT Home Monitoring Account Called ‘I am a new customer’About Your Property ID Number Completing Installation Testing Your System Full Test of Whole System System SettingsSwitch your BT Home Monitor System on Built in SirenUsing Your BT Home Monitor VP1000 Change User Code KeyfobMaster Code Master CodeUser Codes Switching On and OffSwitching on House Press ActionUser Code Switching on HomePress Action Switching OFF Changing from on Home to on HouseChanging Sensor Response Types Sensor Response TypesSensor Help, Fire and Emergency Alerts Intrusion Sensors Contact ProcedureSensor Alerts Fire SensorsMessages on Your Control Panel Alert MessagesMessages from BT Home Monitoring Ready / MemorySend no on / OFF Alarm On and Off StatusSend on / OFF Press Display PIN # Test Remote accessSwitch Remote Access OFF AT the Control Panel To USE Voice CommunicationHear a status report User Settings Menu Panel FunctionsSystem Profile Menu Change User CodeAdd / Delete / Change Sensor Display shows S number Chime Scroll through these options Attic Hall Back DoorBasement BathroomAdd / Delete Keyfob DeleteOFF to Delete PressADD / DEL Keyfob ADD / DEL Keypad Add / Delete KeypadAdd / Delete Siren Test Sensors System SettingsExit Delay Time Test External SirenCommunications Settings BT Serial Number Factory ResetRecord Speech Custom LocationWireless Sensors Accessory FunctionsUnderstanding Accessory Settings Hour Sensors and Panic Functions Setting Sensor Response TypesIntruder Alerts Adding and Numbering a Sensor ADD SensorDisplay shows Number Location Selecting the Sensor Response TypeSelecting the Sensor Name Number ResponseDisplay shows Sensor no Melody Chime Sensor Name Selecting a Sensor SignalDeleting a Sensor Show / OK Display shows Sensor NOnumberDisplay shows OFF to Delete Display shows Keyfob no Adding and Numbering a KeyfobDeleting a Keyfob Display shows 1-WAY KP no Adding and Numbering a KeypadDeleting a Keypad Display shows Keypad noAdd / Delete Smoke Detector Logging Using An Online AccountOnly available if you have access to the internet Welcome Page and NavigationProperty Details Account DetailsAccount Users Monitor My PropertyContacts Testing AlertsEvent Details Locations For exampleReceiving Your BT Home Monitor TroubleshootingInstalling Your BT Home Monitor Do I have to programme the Control Panel? Why do I have to plug in my telephone line last?Do I have to set up the online account? What if I move?How do I add a new accessory? What is ‘Chime’?What is ‘Send on / OFF’? See there are different responses for Sensors, why?Why does my Movement Detector keep generating false alarms? Problems with the BT Home Monitor SystemWhy does my Control Panel have a communication failure? How do I know if a battery needs changing? What should I do if my telephone line is faulty?Operating Your BT Home Monitor in Emergencies Problems with the Online AccountKeep getting asked for my password after I am logged in? What happens if my electricity supply fails?Can I put in 999 as a contact? How can I tell if a BT Home Monitor alert is a false alarm?Why do I need a Master Code and User Code? UsageGuide To Alerts Hour AlertsFirst, to guard against a Received if a sensor First nominated Received if you have Troubleshooting Battery Panel Replace the battery BT Home Monitoring ServiceLow Battery Is not securely shut Case AlarmRe-registering it to the panel Low Battery Panel Replace the battery Remote KeypadInactivity Panel for 4 hours Support Contact UsProduct Information SpecificationsGeneral Information Control PanelMagnetic Contact Movement DetectorColour Ivory Operating Temperature -10 to 50C 14 to 122FWeight Inc. Battery 21g 3/4oz Colour Black KeyfobOutside of the 12 month guarantee period BT GuaranteeConditions of this guarantee are Instruction for returning the productContents Terms And ConditionsDuration ServiceMaking Sure the Service is Secure OUR CommitmentPaying OUR Charges Repairing Faults in the ServiceUSE of the Service Matters Beyond the Reasonable Control of Either Party Suspension of the ServiceIf YOU Break this Contract Limitation of LiabilityHOW this Contract can be Changed HOW to Give NoticeEnding this Contract Transfer of Rights and ObligationsLAW and Jurisdiction Annex a Schedule of ServiceSeverability We willDeclaration of Conformity for Please NoteAnnex B Offices worldwide

VP1000 specifications

The BT VP1000 is a state-of-the-art video conferencing system designed to enhance communication and collaboration in business settings. This device stands out due to its remarkable features, technologies, and characteristics, making it an excellent choice for organizations seeking robust and efficient video conferencing solutions.

One of the most notable features of the BT VP1000 is its high-definition video quality, which is supported by advanced codecs that optimize bandwidth usage without compromising on clarity. Users can expect crisp visuals, allowing for clearer communication during meetings, whether they are in the same room or remote locations. The device supports resolutions up to 1080p, ensuring that participants can see and engage with each other effectively.

Audio quality is equally impressive with the BT VP1000. It incorporates advanced noise reduction technologies and high-fidelity speakers, providing clear and natural sound. The array microphones help capture voices from all corners of the room, ensuring that everyone can contribute to the conversation, thus enriching the collaborative experience.

The BT VP1000 also boasts an intuitive user interface, making it easy for users of all skill levels to navigate its features. With one-touch meeting initiation, participants can quickly join video calls without the hassle of complicated setups. The system is compatible with various platforms, ensuring seamless integration with existing IT infrastructures.

Moreover, the BT VP1000 supports multiple connectivity options, including HDMI and USB, facilitating easy connection to laptops and other devices. This versatility allows users to share presentations and documents effortlessly, promoting more productive meetings.

Security is a top priority for businesses, and the BT VP1000 is equipped with robust encryption and data protection protocols. This ensures that sensitive information shared during video calls remains secure from potential cyber threats.

In terms of design, the BT VP1000 is sleek and modern, making it an attractive addition to any conference room. It is engineered for durability as well, ensuring long-lasting performance.

In summary, the BT VP1000 is an exemplary video conferencing device that harmonizes visual clarity, superior audio quality, user-friendly features, and seamless connectivity. Its focus on security also makes it a reliable choice for businesses looking to enhance their communication capabilities. By adopting the BT VP1000, organizations can expect to elevate their collaboration efforts significantly while fostering an efficient work environment.