BT VP1000 manual Communications Settings

Page 36

BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725

SIREN ON TIME

When your BT Home Monitor VP1000 triggers in response to unwanted activity, the internal siren will sound immediately (unless the detector is on an entry delay). You can choose how long you would like the internal siren to sound for. Choices are in minutes: 1 minute, 3m, 4m (default), 8m, 10m, 15m, 20m.

BUILT IN SIREN

You can choose to turn your internal siren off using this option. This is particularly useful for when you are testing the system, as the siren is very loud.

If you do turn your internal siren off for testing, remember to turn it back on once you have finished.

CHECK – BEEPS

When your BT Home Monitor VP1000 responds to an event, or detects a problem which needs attention, the CHECK indicator on the front panel will light, it will emit audible beeps at regular intervals (three per minute) and show a message on the display. You can choose whether to have the beeps enabled or not. Choices are: disable beeps, enable beeps (default).

To remove any CHECK indications, you must interrogate the panel memory for alerts or faults and attend to them. If you cannot eliminate the problem immediately, and you wish to temporarily suspend the beeps, press the button on your Keyfob or the OFF button followed by your USER PIN on the Control Panel or Keypad. This will silence the beeps for four hours.

For assistance in resolving problems, and eliminating CHECK indications, please refer to the troubleshooting section.

Communications Settings

This menu option allows you to change operational settings for your system including:

•1st Telephone Number

•Property ID Number

•2nd Telephone Number

•Two Way Voice

•Send ON / OFF

1ST TELEPHONE NUMBER

This is the number your system will call to contact the BT Home Monitoring centre. This is pre-programmed and should not be changed. Note that the telephone number has an 0870 prefix, meaning your system will not be able to dial the monitoring service if you use national rate call barring on your telephone line.

PROPERTY ID NUMBER

This is the number which was provided to you at the end of your account set up process.

It is known as your PROPERTY ID NUMBER, which identifies your property to the BT Home Monitoring centre. Once input – it should not be changed.

2ND TELEPHONE NUMBER

This is the back-up number your system will call to the BT Home Monitoring centre. This is pre-programmed and should not be changed.

TWO WAY VOICE

Choices are: Enable two-way Disable two-way (default)

This function allows you to listen or speak in to the monitored property through the control panel.

SEND ON / OFF

ONLY AVAILABLE IF YOU HAVE ACCESS TO THE INTERNET

This option allows your BT Home Monitor VP1000 to send a message to the BT Home Monitoring service every time it is switched on and off. This is a useful feature, as you can view the status of your system remotely from your personal online account, to tell if your alarm is switched on or off. You can use this feature to tell if you or another member of your household remembered to switch on the system before leaving home. Note this will result in outgoing calls from your property so the default is off.*

Choices are: Send NO On / Off (default), Send On/ Off.

*Note that call charges will apply each time your system makes an outgoing call.

SECTION 4

35

Page 35 Page 37
Image 36
Page 35 Page 37
Contents BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 2601 04 ~ User GuideContents Key Features Getting StartedIntroduction Overview Installing Your BT Home Monitor VP1000 System RequirementsInside the Box Connecting the Power Activating the BatteryInsert the rechargeable battery pack. Fig Activating Control PanelInstalling Wireless Sensors Locating the Wireless SensorsDefault Settings BT Home Monitor VP1000 package is set-up as followsInstalling the Magnetic Contact To install the Magnetic Contact, follow these instructionsMounting Using Adhesive LocatingMounting Using Screws Installing the Movement DetectorRemove the cover by unscrewing the closure screw. Fig Gently pull apart the base from the coverTips On Effective Positioning Remove the front cover using a screwdriver Installing the KeyfobAnother 7 Keyfobs can be registered to your Control Panel Activating the KeyfobRegistering For Your BT Home Monitoring Account Called ‘I am a new customer’About Your Property ID Number Completing Installation Testing Your System System Settings Switch your BT Home Monitor System onFull Test of Whole System Built in SirenUsing Your BT Home Monitor VP1000 Keyfob Master CodeChange User Code Master CodeSwitching On and Off Switching on HouseUser Codes Press ActionSwitching on Home Press Action Switching OFFUser Code Changing from on Home to on HouseSensor Response Types SensorChanging Sensor Response Types Help, Fire and Emergency Alerts Contact Procedure Sensor AlertsIntrusion Sensors Fire SensorsAlert Messages Messages from BT Home MonitoringMessages on Your Control Panel Ready / MemoryAlarm On and Off Status Send on / OFFSend no on / OFF Remote access Switch Remote Access OFF AT the Control PanelPress Display PIN # Test To USE Voice CommunicationHear a status report User Settings Menu Panel FunctionsSystem Profile Menu Change User CodeAdd / Delete / Change Sensor Scroll through these options Attic Hall Back Door BasementDisplay shows S number Chime BathroomAdd / Delete Keyfob DeletePress ADD / DEL KeyfobOFF to Delete Add / Delete Keypad Add / Delete SirenADD / DEL Keypad System Settings Exit Delay TimeTest Sensors Test External SirenCommunications Settings Factory Reset Record SpeechBT Serial Number Custom LocationAccessory Functions Understanding Accessory SettingsWireless Sensors Setting Sensor Response Types Intruder AlertsHour Sensors and Panic Functions Adding and Numbering a Sensor ADD SensorSelecting the Sensor Response Type Selecting the Sensor NameDisplay shows Number Location Number ResponseSelecting a Sensor Signal Deleting a SensorDisplay shows Sensor no Melody Chime Sensor Name Show / OK Display shows Sensor NOnumberAdding and Numbering a Keyfob Deleting a KeyfobDisplay shows OFF to Delete Display shows Keyfob no Adding and Numbering a Keypad Deleting a KeypadDisplay shows 1-WAY KP no Display shows Keypad noAdd / Delete Smoke Detector Using An Online Account Only available if you have access to the internetLogging Welcome Page and NavigationAccount Details Account UsersProperty Details Monitor My PropertyTesting Alerts Event DetailsContacts Locations For exampleTroubleshooting Installing Your BT Home MonitorReceiving Your BT Home Monitor Why do I have to plug in my telephone line last? Do I have to set up the online account?Do I have to programme the Control Panel? What if I move?What is ‘Chime’? What is ‘Send on / OFF’?How do I add a new accessory? See there are different responses for Sensors, why?Problems with the BT Home Monitor System Why does my Control Panel have a communication failure?Why does my Movement Detector keep generating false alarms? How do I know if a battery needs changing? What should I do if my telephone line is faulty?Problems with the Online Account Keep getting asked for my password after I am logged in?Operating Your BT Home Monitor in Emergencies What happens if my electricity supply fails?How can I tell if a BT Home Monitor alert is a false alarm? Why do I need a Master Code and User Code?Can I put in 999 as a contact? UsageGuide To Alerts Hour AlertsFirst, to guard against a Received if a sensor First nominated Received if you have Troubleshooting BT Home Monitoring Service Low BatteryBattery Panel Replace the battery Is not securely shut Case AlarmLow Battery Panel Replace the battery Remote Keypad Inactivity Panel for 4 hoursRe-registering it to the panel Support Contact UsSpecifications General InformationProduct Information Control PanelMagnetic Contact Movement DetectorOperating Temperature -10 to 50C 14 to 122F Weight Inc. Battery 21g 3/4oz Colour BlackColour Ivory KeyfobBT Guarantee Conditions of this guarantee areOutside of the 12 month guarantee period Instruction for returning the productContents Terms And ConditionsService Making Sure the Service is SecureDuration OUR CommitmentRepairing Faults in the Service USE of the ServicePaying OUR Charges Suspension of the Service If YOU Break this ContractMatters Beyond the Reasonable Control of Either Party Limitation of LiabilityHOW to Give Notice Ending this ContractHOW this Contract can be Changed Transfer of Rights and ObligationsAnnex a Schedule of Service SeverabilityLAW and Jurisdiction We willPlease Note Annex BDeclaration of Conformity for Offices worldwide

VP1000 specifications

The BT VP1000 is a state-of-the-art video conferencing system designed to enhance communication and collaboration in business settings. This device stands out due to its remarkable features, technologies, and characteristics, making it an excellent choice for organizations seeking robust and efficient video conferencing solutions.

One of the most notable features of the BT VP1000 is its high-definition video quality, which is supported by advanced codecs that optimize bandwidth usage without compromising on clarity. Users can expect crisp visuals, allowing for clearer communication during meetings, whether they are in the same room or remote locations. The device supports resolutions up to 1080p, ensuring that participants can see and engage with each other effectively.

Audio quality is equally impressive with the BT VP1000. It incorporates advanced noise reduction technologies and high-fidelity speakers, providing clear and natural sound. The array microphones help capture voices from all corners of the room, ensuring that everyone can contribute to the conversation, thus enriching the collaborative experience.

The BT VP1000 also boasts an intuitive user interface, making it easy for users of all skill levels to navigate its features. With one-touch meeting initiation, participants can quickly join video calls without the hassle of complicated setups. The system is compatible with various platforms, ensuring seamless integration with existing IT infrastructures.

Moreover, the BT VP1000 supports multiple connectivity options, including HDMI and USB, facilitating easy connection to laptops and other devices. This versatility allows users to share presentations and documents effortlessly, promoting more productive meetings.

Security is a top priority for businesses, and the BT VP1000 is equipped with robust encryption and data protection protocols. This ensures that sensitive information shared during video calls remains secure from potential cyber threats.

In terms of design, the BT VP1000 is sleek and modern, making it an attractive addition to any conference room. It is engineered for durability as well, ensuring long-lasting performance.

In summary, the BT VP1000 is an exemplary video conferencing device that harmonizes visual clarity, superior audio quality, user-friendly features, and seamless connectivity. Its focus on security also makes it a reliable choice for businesses looking to enhance their communication capabilities. By adopting the BT VP1000, organizations can expect to elevate their collaboration efforts significantly while fostering an efficient work environment.
Top Page Image Contents