BT VP1000 manual Full Test of Whole System, System Settings, Built in Siren

Page 16

BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725

4 FULL TEST OF WHOLE SYSTEM

It is advisable to disable your Internal Siren for this test. To do this, follow these instructions:

 

PRESS

DISPLAY

 

NEXT

Twice until the display shows

 

 

SYSTEM PROFILE.

 

 

If you are Contact 1 you will receive a phone call, text message or e-mail or a combination of alerts depending on the information that was input at the time of registration. Respond to the alert by following the instructions in the alert messages.

Please remember to turn your Internal Siren back on at this point.

SHOW / OK

NEXT

SHOW / OK

NEXT

SHOW / OK

SHOW / OK

Enter default PIN 2580 (or your new PIN if you have chosen one).

Until display shows

SYSTEM SETTINGS.

Until display shows

BUILT IN SIREN.

Display shows SIREN ON.

Until display shows SIREN OFF.

Congratulations, your BT Home Monitor

VP1000 is now set up.

BT Sales

For assistance in purchasing any additional accessories, please contact

BT Home Monitoring on 0800 587 8877

or visit http://www.bt.com/homemonitoring

BT Support

For help at any time, please consult the troubleshooting section of this guide, or

SECTION

SHOW / OK

HOME

Twice to confirm change.

Three times, then <ON> to return to READY.

call the BT Home Monitoring helpdesk on 0870 240 1979 – Open normal office hours. Call charges will apply. Or email: bthomemonitoring-support@bt.com

2

Now complete the full test of your BT Home Monitoring system. If you are testing to ensure all your chosen contacts receive alert messages, remember to warn them in advance.

Switch your BT Home Monitor System ON.

Wait for the exit beeps to finish, then set off at least one or two sensors, ideally the Movement Detectors as these will react immediately.

Shortly your home phone should ring, this is the first part of the reporting process, to help identify false alarms. Ignore this if you wish to test that messages are being sent to nominated contacts.

15

Image 16
Contents BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 2601 04 ~ User GuideContents Getting Started Key FeaturesIntroduction Overview System Requirements Installing Your BT Home Monitor VP1000Inside the Box Connecting the Power Activating the BatteryInsert the rechargeable battery pack. Fig Activating Control PanelInstalling Wireless Sensors Locating the Wireless SensorsDefault Settings BT Home Monitor VP1000 package is set-up as followsInstalling the Magnetic Contact To install the Magnetic Contact, follow these instructionsMounting Using Adhesive LocatingMounting Using Screws Installing the Movement DetectorRemove the cover by unscrewing the closure screw. Fig Gently pull apart the base from the coverTips On Effective Positioning Remove the front cover using a screwdriver Installing the KeyfobAnother 7 Keyfobs can be registered to your Control Panel Activating the KeyfobRegistering For Your BT Home Monitoring Account Called ‘I am a new customer’About Your Property ID Number Completing Installation Testing Your System System Settings Switch your BT Home Monitor System onFull Test of Whole System Built in SirenUsing Your BT Home Monitor VP1000 Keyfob Master CodeChange User Code Master CodeSwitching On and Off Switching on HouseUser Codes Press ActionSwitching on Home Press Action Switching OFFUser Code Changing from on Home to on HouseSensor Sensor Response TypesChanging Sensor Response Types Help, Fire and Emergency Alerts Contact Procedure Sensor AlertsIntrusion Sensors Fire SensorsAlert Messages Messages from BT Home MonitoringMessages on Your Control Panel Ready / MemorySend on / OFF Alarm On and Off StatusSend no on / OFF Remote access Switch Remote Access OFF AT the Control PanelPress Display PIN # Test To USE Voice CommunicationHear a status report User Settings Menu Panel FunctionsSystem Profile Menu Change User CodeAdd / Delete / Change Sensor Scroll through these options Attic Hall Back Door BasementDisplay shows S number Chime BathroomAdd / Delete Keyfob DeleteADD / DEL Keyfob PressOFF to Delete Add / Delete Siren Add / Delete KeypadADD / DEL Keypad System Settings Exit Delay TimeTest Sensors Test External SirenCommunications Settings Factory Reset Record SpeechBT Serial Number Custom LocationUnderstanding Accessory Settings Accessory FunctionsWireless Sensors Intruder Alerts Setting Sensor Response TypesHour Sensors and Panic Functions Adding and Numbering a Sensor ADD SensorSelecting the Sensor Response Type Selecting the Sensor NameDisplay shows Number Location Number ResponseSelecting a Sensor Signal Deleting a SensorDisplay shows Sensor no Melody Chime Sensor Name Show / OK Display shows Sensor NOnumberDeleting a Keyfob Adding and Numbering a KeyfobDisplay shows OFF to Delete Display shows Keyfob no Adding and Numbering a Keypad Deleting a KeypadDisplay shows 1-WAY KP no Display shows Keypad noAdd / Delete Smoke Detector Using An Online Account Only available if you have access to the internetLogging Welcome Page and NavigationAccount Details Account UsersProperty Details Monitor My PropertyEvent Details Testing AlertsContacts Locations For exampleInstalling Your BT Home Monitor TroubleshootingReceiving Your BT Home Monitor Why do I have to plug in my telephone line last? Do I have to set up the online account?Do I have to programme the Control Panel? What if I move?What is ‘Chime’? What is ‘Send on / OFF’?How do I add a new accessory? See there are different responses for Sensors, why?Why does my Control Panel have a communication failure? Problems with the BT Home Monitor SystemWhy does my Movement Detector keep generating false alarms? How do I know if a battery needs changing? What should I do if my telephone line is faulty?Problems with the Online Account Keep getting asked for my password after I am logged in?Operating Your BT Home Monitor in Emergencies What happens if my electricity supply fails?How can I tell if a BT Home Monitor alert is a false alarm? Why do I need a Master Code and User Code?Can I put in 999 as a contact? UsageGuide To Alerts Hour AlertsFirst, to guard against a Received if a sensor First nominated Received if you have Troubleshooting BT Home Monitoring Service Low BatteryBattery Panel Replace the battery Is not securely shut Case AlarmInactivity Panel for 4 hours Low Battery Panel Replace the battery Remote KeypadRe-registering it to the panel Support Contact UsSpecifications General InformationProduct Information Control PanelMagnetic Contact Movement DetectorOperating Temperature -10 to 50C 14 to 122F Weight Inc. Battery 21g 3/4oz Colour BlackColour Ivory KeyfobBT Guarantee Conditions of this guarantee areOutside of the 12 month guarantee period Instruction for returning the productContents Terms And ConditionsService Making Sure the Service is SecureDuration OUR CommitmentUSE of the Service Repairing Faults in the ServicePaying OUR Charges Suspension of the Service If YOU Break this ContractMatters Beyond the Reasonable Control of Either Party Limitation of LiabilityHOW to Give Notice Ending this ContractHOW this Contract can be Changed Transfer of Rights and ObligationsAnnex a Schedule of Service SeverabilityLAW and Jurisdiction We willAnnex B Please NoteDeclaration of Conformity for Offices worldwide

VP1000 specifications

The BT VP1000 is a state-of-the-art video conferencing system designed to enhance communication and collaboration in business settings. This device stands out due to its remarkable features, technologies, and characteristics, making it an excellent choice for organizations seeking robust and efficient video conferencing solutions.

One of the most notable features of the BT VP1000 is its high-definition video quality, which is supported by advanced codecs that optimize bandwidth usage without compromising on clarity. Users can expect crisp visuals, allowing for clearer communication during meetings, whether they are in the same room or remote locations. The device supports resolutions up to 1080p, ensuring that participants can see and engage with each other effectively.

Audio quality is equally impressive with the BT VP1000. It incorporates advanced noise reduction technologies and high-fidelity speakers, providing clear and natural sound. The array microphones help capture voices from all corners of the room, ensuring that everyone can contribute to the conversation, thus enriching the collaborative experience.

The BT VP1000 also boasts an intuitive user interface, making it easy for users of all skill levels to navigate its features. With one-touch meeting initiation, participants can quickly join video calls without the hassle of complicated setups. The system is compatible with various platforms, ensuring seamless integration with existing IT infrastructures.

Moreover, the BT VP1000 supports multiple connectivity options, including HDMI and USB, facilitating easy connection to laptops and other devices. This versatility allows users to share presentations and documents effortlessly, promoting more productive meetings.

Security is a top priority for businesses, and the BT VP1000 is equipped with robust encryption and data protection protocols. This ensures that sensitive information shared during video calls remains secure from potential cyber threats.

In terms of design, the BT VP1000 is sleek and modern, making it an attractive addition to any conference room. It is engineered for durability as well, ensuring long-lasting performance.

In summary, the BT VP1000 is an exemplary video conferencing device that harmonizes visual clarity, superior audio quality, user-friendly features, and seamless connectivity. Its focus on security also makes it a reliable choice for businesses looking to enhance their communication capabilities. By adopting the BT VP1000, organizations can expect to elevate their collaboration efforts significantly while fostering an efficient work environment.