BT VP1000 manual Add / Delete Keyfob

Page 32

BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725

You may at some point decide you do not wish to use one or more of your wireless sensors.

To delete a sensor from the Control Panel, follow these instructions.

 

PRESS

DISPLAY

 

NEXT

Until the display shows

 

 

SYSTEM PROFILE.

 

 

Add / Delete Keyfob

You can use up to 8 Keyfobs with the BT Home Monitor VP1000. One is already supplied with your BT Home Monitor VP1000, so an additional 7 users can be provided with a Keyfob.

The Keyfob numbers allocated should correspond to the User Code numbers also allocated, i.e. user number 3 who has a unique PIN code should have

SHOW / OK

NEXT

SHOW / OK

Enter your MASTER CODE – if you have not selected a personal PIN number, this will be the default setting - 2580.

Display shows

ADD / DEL SENSOR.

Display shows SENSOR NO:--

Keyfob number 3. This will enable you to know who responded to alerts and turned the system on and off (if the Alarm On and Off status feature is activated). See next section on Communications Settings for more details.

Please be aware that Keyfobs allow your security system to be switched on and off without the need for a PIN number, so they should not be stored

SHOW / OK

SHOW / OK

OFF

NEXT

HOME

Enter the Sensor number for the sensor you wish to delete e.g. 04 or press NEXT to scroll through the list.

Display shows S (number):

DELETE.

Display shows <OFF> TO CLEAR.

Display shows S (number):

Choose either:

To move to the next sensor.

Or

Three times, when <OK> to exit to return to READY.

in conjunction with your address. Also, please ensure that Keyfobs are kept with the correct owner if you want to identify who switched the

system on and off and when.SECTION 4

You may also wish to remove the battery.

Please remember to update your personal account with this information so that your monitoring service can report information accurately. You can do this by ringing the number shown on your registration form or via your Internet account.

31

Image 32
Contents BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 2601 04 ~ User GuideContents Introduction Key FeaturesGetting Started Overview Inside the Box Installing Your BT Home Monitor VP1000System Requirements Connecting the Power Activating the BatteryInsert the rechargeable battery pack. Fig Activating Control PanelInstalling Wireless Sensors Locating the Wireless SensorsDefault Settings BT Home Monitor VP1000 package is set-up as followsInstalling the Magnetic Contact To install the Magnetic Contact, follow these instructionsMounting Using Adhesive LocatingMounting Using Screws Installing the Movement DetectorRemove the cover by unscrewing the closure screw. Fig Gently pull apart the base from the coverTips On Effective Positioning Remove the front cover using a screwdriver Installing the KeyfobAnother 7 Keyfobs can be registered to your Control Panel Activating the KeyfobRegistering For Your BT Home Monitoring Account Called ‘I am a new customer’About Your Property ID Number Completing Installation Testing Your System System Settings Switch your BT Home Monitor System onFull Test of Whole System Built in SirenUsing Your BT Home Monitor VP1000 Keyfob Master CodeChange User Code Master CodeSwitching On and Off Switching on HouseUser Codes Press ActionSwitching on Home Press Action Switching OFFUser Code Changing from on Home to on HouseChanging Sensor Response Types Sensor Response TypesSensor Help, Fire and Emergency Alerts Contact Procedure Sensor AlertsIntrusion Sensors Fire SensorsAlert Messages Messages from BT Home MonitoringMessages on Your Control Panel Ready / MemorySend no on / OFF Alarm On and Off StatusSend on / OFF Remote access Switch Remote Access OFF AT the Control PanelPress Display PIN # Test To USE Voice CommunicationHear a status report User Settings Menu Panel FunctionsSystem Profile Menu Change User CodeAdd / Delete / Change Sensor Scroll through these options Attic Hall Back Door BasementDisplay shows S number Chime BathroomAdd / Delete Keyfob DeleteOFF to Delete PressADD / DEL Keyfob ADD / DEL Keypad Add / Delete KeypadAdd / Delete Siren System Settings Exit Delay TimeTest Sensors Test External SirenCommunications Settings Factory Reset Record SpeechBT Serial Number Custom LocationWireless Sensors Accessory FunctionsUnderstanding Accessory Settings Hour Sensors and Panic Functions Setting Sensor Response TypesIntruder Alerts Adding and Numbering a Sensor ADD SensorSelecting the Sensor Response Type Selecting the Sensor NameDisplay shows Number Location Number ResponseSelecting a Sensor Signal Deleting a SensorDisplay shows Sensor no Melody Chime Sensor Name Show / OK Display shows Sensor NOnumberDisplay shows OFF to Delete Display shows Keyfob no Adding and Numbering a KeyfobDeleting a Keyfob Adding and Numbering a Keypad Deleting a KeypadDisplay shows 1-WAY KP no Display shows Keypad noAdd / Delete Smoke Detector Using An Online Account Only available if you have access to the internetLogging Welcome Page and NavigationAccount Details Account UsersProperty Details Monitor My PropertyContacts Testing AlertsEvent Details Locations For exampleReceiving Your BT Home Monitor TroubleshootingInstalling Your BT Home Monitor Why do I have to plug in my telephone line last? Do I have to set up the online account?Do I have to programme the Control Panel? What if I move?What is ‘Chime’? What is ‘Send on / OFF’?How do I add a new accessory? See there are different responses for Sensors, why?Why does my Movement Detector keep generating false alarms? Problems with the BT Home Monitor SystemWhy does my Control Panel have a communication failure? How do I know if a battery needs changing? What should I do if my telephone line is faulty?Problems with the Online Account Keep getting asked for my password after I am logged in?Operating Your BT Home Monitor in Emergencies What happens if my electricity supply fails?How can I tell if a BT Home Monitor alert is a false alarm? Why do I need a Master Code and User Code?Can I put in 999 as a contact? UsageGuide To Alerts Hour AlertsFirst, to guard against a Received if a sensor First nominated Received if you have Troubleshooting BT Home Monitoring Service Low BatteryBattery Panel Replace the battery Is not securely shut Case AlarmRe-registering it to the panel Low Battery Panel Replace the battery Remote KeypadInactivity Panel for 4 hours Support Contact UsSpecifications General InformationProduct Information Control PanelMagnetic Contact Movement DetectorOperating Temperature -10 to 50C 14 to 122F Weight Inc. Battery 21g 3/4oz Colour BlackColour Ivory KeyfobBT Guarantee Conditions of this guarantee areOutside of the 12 month guarantee period Instruction for returning the productContents Terms And ConditionsService Making Sure the Service is SecureDuration OUR CommitmentPaying OUR Charges Repairing Faults in the ServiceUSE of the Service Suspension of the Service If YOU Break this ContractMatters Beyond the Reasonable Control of Either Party Limitation of LiabilityHOW to Give Notice Ending this ContractHOW this Contract can be Changed Transfer of Rights and ObligationsAnnex a Schedule of Service SeverabilityLAW and Jurisdiction We willDeclaration of Conformity for Please NoteAnnex B Offices worldwide

VP1000 specifications

The BT VP1000 is a state-of-the-art video conferencing system designed to enhance communication and collaboration in business settings. This device stands out due to its remarkable features, technologies, and characteristics, making it an excellent choice for organizations seeking robust and efficient video conferencing solutions.

One of the most notable features of the BT VP1000 is its high-definition video quality, which is supported by advanced codecs that optimize bandwidth usage without compromising on clarity. Users can expect crisp visuals, allowing for clearer communication during meetings, whether they are in the same room or remote locations. The device supports resolutions up to 1080p, ensuring that participants can see and engage with each other effectively.

Audio quality is equally impressive with the BT VP1000. It incorporates advanced noise reduction technologies and high-fidelity speakers, providing clear and natural sound. The array microphones help capture voices from all corners of the room, ensuring that everyone can contribute to the conversation, thus enriching the collaborative experience.

The BT VP1000 also boasts an intuitive user interface, making it easy for users of all skill levels to navigate its features. With one-touch meeting initiation, participants can quickly join video calls without the hassle of complicated setups. The system is compatible with various platforms, ensuring seamless integration with existing IT infrastructures.

Moreover, the BT VP1000 supports multiple connectivity options, including HDMI and USB, facilitating easy connection to laptops and other devices. This versatility allows users to share presentations and documents effortlessly, promoting more productive meetings.

Security is a top priority for businesses, and the BT VP1000 is equipped with robust encryption and data protection protocols. This ensures that sensitive information shared during video calls remains secure from potential cyber threats.

In terms of design, the BT VP1000 is sleek and modern, making it an attractive addition to any conference room. It is engineered for durability as well, ensuring long-lasting performance.

In summary, the BT VP1000 is an exemplary video conferencing device that harmonizes visual clarity, superior audio quality, user-friendly features, and seamless connectivity. Its focus on security also makes it a reliable choice for businesses looking to enhance their communication capabilities. By adopting the BT VP1000, organizations can expect to elevate their collaboration efforts significantly while fostering an efficient work environment.