On-Q/Legrand HMS 1100 owner manual Overall Description, Console Operation

Page 10

OVERALL DESCRIPTION

Console Operation

The console is designed with everything that is necessary for you to program and operate your HMS 1100 control and security system. Because we feel that it is very important for you to feel comfortable with the operation of your HMS 1100, we recommend that you start by becoming familiar with your console.

The OFF (1), DAY (2), NIGHT (3), and AWAY (4) keys are called shortcut keys. This means that you may press these keys to go directly to that function without having to go into one of the "hidden" menus.

1- ' OFF '

The ' OFF ' key is used to disarm (deactivate) the security system, reset the fire and emergency alarms, and silence all sirens and sounders.

2- ' DAY '

The ' DAY ' key is used to arm the security system in the Day mode. In the Day mode, the perimeter zones (doors and windows) are protected, however, the interior zones are not armed so that you may move about freely inside. In this mode, there is an entry delay on entry-exit zones.

3- ' NIGHT '

The ' NIGHT ' key is used to arm the security system in the Night mode. In the Night mode, the doors, windows, and non- sleeping area motion detectors are armed. In this mode, there is no entry delay so the alarm will be activated immediately if any zone is violated.

4- ' AWAY '

The ' AWAY ' key is used to arm the security system in the Away mode. In the Away mode, all zones (doors, windows, motions, etc.) are armed. There is an entry delay on entry-exit zones, so that you can disarm the system when you return through the door.

5- Down Arrow

The Down Arrow key is used to scroll through menus and lists. The down arrow is used to scroll down the list from first to last (for example, when the first program is being displayed, pressing the down arrow will cause the next program to be displayed).

Page 2

Image 10

Contents HMS Page Contents Control Telephone Control Page Underwriters Laboratories Requirements Page Introduction Underwriters Laboratories UL ListingOverall Description Console OperationNormal Top-Level Display Display MenusTrouble Beeps Error BeepsMain Menu To silence the beeper, press the * keyAreas HMS 1100 MaintenanceCancel Confirmation BeepArming the Security System Disarming the Security System and Silencing AlarmsSecurity System Operation = OFF= Night Using Shortcut Keys= Night DLY Night Delay = VacationBypassing Zones = RestoreQuick Arm Restoring ZonesBurglar Alarm Activated What To Do When You Come HomeWhat Happens When the Alarm is Activated #=GOTOGas Alarm Activated Fire Alarm ActivatedEmergency Keys Alarm Reset Duress Code Entered or Duress Alarm ActivatedAlarm Cancel Trouble Indications Master CodeArea Arming Panic SwitchesDuress Code Manager CodeGoto Area Testing Your System Control Control CommandsALC Switch Modules ModulesHouse Codes Unit NumbersScrolling Through Names Dimming and Brightening Controlling UnitsLighting Level Ramp Command Timed CommandsScene Command Compose Controlling Outputs Status of a UnitInternal Flags All On / OffLeviton Scene Control ScenesButtons Temperature Control HMS ThermostatsIf hold mode is On, Hold is shown Outdoor Temperature Temperature AlarmsFreeze Alarms Temperature Control of AppliancesStatus Through Tstat Mode Auto FAN Auto Show EventsMessages Clear Text MessagesLog Message MessageShow Message Clear MessagePhone Message Send Message Pro-LinkIn-House Phones Telephone ControlTelephone Interface Remote PhonesAlternate Method Phone Access Denied Remote LockoutMain Menu Security TemperatureControl ButtonEvents When the HMS Communicating Thermostat is enteredMessage Playing and Recording a Message Playing and Recording a Custom PhraseEmergency Dial-Out Good-ByePanic Button over the Phone # # # # # # Digital DialerHow the HMS 1100 Voice Dialer Works Voice DialerWhat the HMS 1100 Voice Dialer Does What You Hear If Your HMS 1100 Calls You PC AccessEntering the Code Controller IP Address, Port Number, and Encryption Key Connecting to Network via PC AccessBuilt-In Ethernet Port HMS 1100 Ethernet ConnectionsLocal Network Dynamic DNSLocal / Wide Area Network Configuration and Advanced Control Programming ACP SetupSet Up Codes Set Up Time Duress Code= Add Programs Advanced Control Programming ACP= Show Programs Otherwise, a help screen is displayed Edit Programs = Delete All ProgramsEdit Programs When Times ProgramsSecurity Mode Event Buttons Control Unit Event / ALC Switch Press Event ButtonsButton and Event Programs Zone Event Buttons All On/Off Event Buttons Alarm Event ButtonsEvent Buttons Miscellaneous Event Buttons Message Event Buttons Pro-LinkProgram Control Commands Edit Program CommandProgram Security Commands Program Temperature Commands Program Button CommandsProgram All On / All Off Commands Program Message CommandsProgram Control Conditions Program Security Mode ConditionsEdit Program Condition Program Zone ConditionsProgram Time Clock Conditions Program Other ConditionsSet Up Dial Dial Out Numbers Dial Out NumberDial Order Entry Delay Set Up ArmingExit Delay Set up Miscellaneous Format Number Description House Codes 2-16 X-10 All Off Zone Name Latitude, Longitude, and Time ZoneDaylight Savings Controller IP Address Controller Port NumberSet Up Names Encryption KeySet Up Voice Set Up AddressUnderwriters Laboratories Requirements Fire Escape PlanningFederal Communication Commission Notice Canadian Industry Canada Notice If YOU have Trouble with Your PhonesAppendix a Dial OUT Planner HMS 1100 Voice Dial-Out PlannerInstructions to Called Party Press 9. The system will say Good-bye and hang upAppendix B Text Description Character Codes Code CharAppendix C Voice Description Codes Code DescriptionFall Online Vault Page Page OnQTechnologies,Inc