On-Q/Legrand HMS 1100 owner manual Set Up Dial

Page 66

Set Up Dial

The Set Up Dial menu is used to configure all of the telephone related items for the HMS 1100. To enter the Set Up Dial menu, from the Setup menu, press the 4 (DIAL) key. Use the arrows to scroll through the items. For each item, the top line displays a description of the item and its current setting. The bottom line shows the available ranges for your selections.

Phone numbers can be up to 24 characters long. The number is shown on the bottom line of the display. Press the OFF key to enter a ' - ' into the number. Press the DAY key to specify a pause of 2 seconds (shown as a "T" on the display). Press the NIGHT key to enter a ' # ' into the number. Enter a single ' - ' for no number.

Telephone Access

The Telephone Access item allows you to turn the local (in-house) and remote telephone control feature on and off.

If set to On, the HMS 1100 will allow local and remote telephone access as described in Telephone Control. If set to Off, the HMS 1100 will not answer incoming calls ever, and will not work on the in house phones. Dial outs will still occur, and the system will operate normally when the HMS 1100 dials out.

If you do not have your HMS 1100 connected to a phone line, set Telephone Access to Off to keep the system from displaying "PHONE LINE DEAD". The default setting for Telephone Access is On.

Answer Outside Call

If you do not want your system to Answer Outside Call, set this item to No. The local (in-house) telephone control features will still work, but the system will never answer an incoming call.

The default setting for Answer Outside Call is Yes.

Remote Commands

The Remote Commands Ok item allows you to prevent any commands from being issued from a remote telephone.

If Remote Commands Ok is set to Yes, the HMS 1100 will allow all commands to be executed when called from a remote telephone. If Remote Commands Ok is set to No, then lights, appliances, and the security system cannot be controlled from a remote telephone that dials into your home.

You can issue commands from a local (in-house) phone with Remote Commands Ok set to Yes or No. The default setting is Yes.

Rings Before Answer

Your phone must ring this number of times before the HMS 1100 will answer an incoming call to your phone.

To change Rings Before Answer, enter the new number from 1 to 15, then press the ' # ' key. The factory default setting is 8.

Dial Type

The Dial Type specifies the type of dialing used when the HMS 1100 dials out. If you do not have Touch-Tone service, then Dial Type must be set to Pulse.

The default Dial Type is Tone.

My Phone Number

My Phone Number is the phone number that will be announced when the HMS 1100 dials out in the event of an alarm. It should be set to the phone number of the premises where your system is installed.

To enter phone numbers, press the keypad keys 0 - 9. You can put in a dash (-) for legibility by pressing the Off key.

Press the ' # ' key after you have pressed all of the digits in the phone number. For example, to enter the number 555-1234, press 555 "OFF" 1234 #.

Page 58

Page 65 Page 67
Image 66
Page 65 Page 67
Contents HMS Page Contents Control Telephone Control Page Underwriters Laboratories Requirements Page Introduction Underwriters Laboratories UL ListingOverall Description Console OperationNormal Top-Level Display Display MenusTrouble Beeps Error BeepsMain Menu To silence the beeper, press the * keyAreas HMS 1100 MaintenanceCancel Confirmation BeepArming the Security System Disarming the Security System and Silencing AlarmsSecurity System Operation = OFF= Night Using Shortcut Keys= Night DLY Night Delay = VacationBypassing Zones = RestoreQuick Arm Restoring ZonesBurglar Alarm Activated What To Do When You Come HomeWhat Happens When the Alarm is Activated #=GOTOFire Alarm Activated Gas Alarm ActivatedEmergency Keys Duress Code Entered or Duress Alarm Activated Alarm ResetAlarm Cancel Trouble Indications Master CodeArea Arming Panic SwitchesDuress Code Manager CodeGoto Area Testing Your System Control Control CommandsALC Switch Modules ModulesHouse Codes Unit NumbersScrolling Through Names Controlling Units Dimming and BrighteningLighting Level Timed Commands Ramp CommandScene Command Compose Controlling Outputs Status of a UnitInternal Flags All On / OffLeviton Scene Control ScenesButtons Temperature Control HMS ThermostatsIf hold mode is On, Hold is shown Outdoor Temperature Temperature AlarmsFreeze Alarms Temperature Control of AppliancesStatus Through Tstat Mode Auto FAN Auto Show EventsMessages Clear Text MessagesLog Message MessageShow Message Clear MessagePhone Message Send Message Pro-LinkIn-House Phones Telephone ControlTelephone Interface Remote PhonesPhone Access Denied Remote Lockout Alternate MethodMain Menu Security TemperatureControl ButtonWhen the HMS Communicating Thermostat is entered EventsMessage Playing and Recording a Message Playing and Recording a Custom PhraseEmergency Dial-Out Good-ByePanic Button over the Phone # # # # # # Digital DialerVoice Dialer How the HMS 1100 Voice Dialer WorksWhat the HMS 1100 Voice Dialer Does PC Access What You Hear If Your HMS 1100 Calls YouEntering the Code Controller IP Address, Port Number, and Encryption Key Connecting to Network via PC AccessBuilt-In Ethernet Port HMS 1100 Ethernet ConnectionsLocal Network Dynamic DNSLocal / Wide Area Network Setup Configuration and Advanced Control Programming ACPSet Up Codes Set Up Time Duress CodeAdvanced Control Programming ACP = Add Programs= Show Programs Otherwise, a help screen is displayed Edit Programs = Delete All ProgramsEdit Programs When Times ProgramsControl Unit Event / ALC Switch Press Event Buttons Security Mode Event ButtonsButton and Event Programs Zone Event Buttons Alarm Event Buttons All On/Off Event ButtonsEvent Buttons Miscellaneous Event Buttons Message Event Buttons Pro-LinkEdit Program Command Program Control CommandsProgram Security Commands Program Temperature Commands Program Button CommandsProgram All On / All Off Commands Program Message CommandsProgram Control Conditions Program Security Mode ConditionsEdit Program Condition Program Zone ConditionsProgram Time Clock Conditions Program Other ConditionsSet Up Dial Dial Out Number Dial Out NumbersDial Order Set Up Arming Entry DelayExit Delay Set up Miscellaneous Format Number Description House Codes 2-16 X-10 All Off Latitude, Longitude, and Time Zone Zone NameDaylight Savings Controller IP Address Controller Port NumberSet Up Names Encryption KeySet Up Voice Set Up AddressUnderwriters Laboratories Requirements Fire Escape PlanningFederal Communication Commission Notice Canadian Industry Canada Notice If YOU have Trouble with Your PhonesAppendix a Dial OUT Planner HMS 1100 Voice Dial-Out PlannerInstructions to Called Party Press 9. The system will say Good-bye and hang upAppendix B Text Description Character Codes Code CharAppendix C Voice Description Codes Code DescriptionFall Online Vault Page Page OnQTechnologies,Inc
Top Page Image Contents