On-Q/Legrand HMS 1100 owner manual Edit Programs When, Times Programs

Page 57

Edit Programs When

Selecting the 1 (WHEN) key, from the Edit Program menu, allows the time or button/event that activates the program to be changed. The display shows:

EDIT WHEN 1=TIMED 2=BUTTON

Times Programs

Selecting 1 (TIMED) sets the program to be activated at a specific time of day. You are prompted to enter the time and date or days of week. The current default value is shown for each item. Press ' # ' to accept the default.

12:00 AM 5/17 1=TIME 2=DATE/DAY

Select 1 (TIME) to enter the new time. If the desired time is the time in which sunrise or sunset will occur, press the up arrow key for sunrise, or the down arrow key for sunset before entering a time.

TIME: 12:00 AM

HHMM ↑=RISE/AM ↓=SET/PM

You may also choose to have the program execute up to 120 minutes before or after the time of sunrise or sunset.

SUNSET

1=BEFORE 2=AFTER #=AT

If the 1(BEFORE) or 2(AFTER) key is selected, you will be prompted to select the amount of minutes:

ENTER OFFSET: 0-120 MINUTES

When entering a time of day, AM/PM must be specified for the time if the AM/PM format is being used. Otherwise the entered time should be 13:00-23:59.

TIME: 8:00 AM

HHMM ↑=RISE/AM ↓=SET/PM

Select 2 (DATE/DAY) to enter a new date or days of week.

DATE: 10/15

MMDD ↓=DAY

Next, specify if the program will run once (on the specified date and then be deleted) or if the program will run every year on the specified date (yearly).

RUN PROGRAM 1=ONCE 2=YEARLY

To change days, press the down arrow (DAY) key. You will be prompted to enter the day(s) that the program will be activated. Press 1-7 for Monday - Sunday, 0 for Once, 8 for Weekdays, and 9 for Weekends, then ' # '.

DAY(S): M-W-F--

1-7=MON-SUN 0=ONCE

Press the ' # ' key and the display will then return to the Edit Program menu:

EDIT PROGRAM

1=WHEN 2=CMD 3=&COND

Page 49

Image 57

Contents HMS Page Contents Control Telephone Control Page Underwriters Laboratories Requirements Page Underwriters Laboratories UL Listing IntroductionConsole Operation Overall DescriptionDisplay Menus Normal Top-Level DisplayMain Menu Error BeepsTrouble Beeps To silence the beeper, press the * keyCancel HMS 1100 MaintenanceAreas Confirmation BeepSecurity System Operation Disarming the Security System and Silencing AlarmsArming the Security System = OFF= Night DLY Night Delay Using Shortcut Keys= Night = VacationQuick Arm = RestoreBypassing Zones Restoring ZonesWhat Happens When the Alarm is Activated What To Do When You Come HomeBurglar Alarm Activated #=GOTOFire Alarm Activated Gas Alarm ActivatedEmergency Keys Duress Code Entered or Duress Alarm Activated Alarm ResetAlarm Cancel Master Code Trouble IndicationsDuress Code Panic SwitchesArea Arming Manager CodeGoto Area Testing Your System ALC Switch Modules Control CommandsControl ModulesUnit Numbers House CodesScrolling Through Names Controlling Units Dimming and BrighteningLighting Level Timed Commands Ramp CommandScene Command Compose Internal Flags Status of a UnitControlling Outputs All On / OffScenes Leviton Scene ControlButtons HMS Thermostats Temperature ControlIf hold mode is On, Hold is shown Freeze Alarms Temperature AlarmsOutdoor Temperature Temperature Control of AppliancesStatus Through Show Events Tstat Mode Auto FAN AutoClear Text Messages MessagesShow Message MessageLog Message Clear MessageSend Message Pro-Link Phone MessageTelephone Interface Telephone ControlIn-House Phones Remote PhonesPhone Access Denied Remote Lockout Alternate MethodMain Menu Control TemperatureSecurity ButtonWhen the HMS Communicating Thermostat is entered EventsMessage Playing and Recording a Custom Phrase Playing and Recording a MessagePanic Button over the Phone # # # # # # Good-ByeEmergency Dial-Out Digital DialerVoice Dialer How the HMS 1100 Voice Dialer WorksWhat the HMS 1100 Voice Dialer Does PC Access What You Hear If Your HMS 1100 Calls YouEntering the Code Built-In Ethernet Port Connecting to Network via PC AccessController IP Address, Port Number, and Encryption Key HMS 1100 Ethernet ConnectionsDynamic DNS Local NetworkLocal / Wide Area Network Setup Configuration and Advanced Control Programming ACPSet Up Codes Duress Code Set Up TimeAdvanced Control Programming ACP = Add Programs= Show Programs Otherwise, a help screen is displayed = Delete All Programs Edit ProgramsTimes Programs Edit Programs WhenControl Unit Event / ALC Switch Press Event Buttons Security Mode Event ButtonsButton and Event Programs Zone Event Buttons Alarm Event Buttons All On/Off Event ButtonsEvent Buttons Message Event Buttons Pro-Link Miscellaneous Event ButtonsEdit Program Command Program Control CommandsProgram Security Commands Program All On / All Off Commands Program Button CommandsProgram Temperature Commands Program Message CommandsEdit Program Condition Program Security Mode ConditionsProgram Control Conditions Program Zone ConditionsProgram Other Conditions Program Time Clock ConditionsSet Up Dial Dial Out Number Dial Out NumbersDial Order Set Up Arming Entry DelayExit Delay Set up Miscellaneous Format Number Description House Codes 2-16 X-10 All Off Latitude, Longitude, and Time Zone Zone NameDaylight Savings Controller Port Number Controller IP AddressEncryption Key Set Up NamesSet Up Address Set Up VoiceFire Escape Planning Underwriters Laboratories RequirementsFederal Communication Commission Notice If YOU have Trouble with Your Phones Canadian Industry Canada NoticeHMS 1100 Voice Dial-Out Planner Appendix a Dial OUT PlannerPress 9. The system will say Good-bye and hang up Instructions to Called PartyCode Char Appendix B Text Description Character CodesCode Description Appendix C Voice Description CodesFall Online Vault Page Page OnQTechnologies,Inc