On-Q/Legrand HMS 1100 owner manual Set up Miscellaneous

Page 69

Enable Quick Arm

The Quick Arm feature allows the security system to be armed by pressing the desired mode key twice instead of having to enter your code.

The default setting for Enable Quick Arm is No.

Enable Auto Bypass

The Auto-Bypassfeature allows the system to automatically bypass an open zone when the system is armed, rather than setting off the alarm. In some applications, it may be preferable to allow arming only if all zones are secure (READY).

With Auto-BypassOff, all zones to be armed must be secure when the system is armed. Otherwise, the console will beep three times and display "ZONE NOT RDY". If the system is armed and a zone is open when the Exit Delay expires, the alarm will sound.

All On For Alarm

This option will instruct HMS 1100 to execute an X-10 All On command in the event that any type of alarm occurs.

Beep On Trouble

If the HMS 1100 detects any troubles with itself or one of the zones connected to it, it will display a message on the screen and beep the console twice per second, continuously (i.e. beep beep...beep beep...). You can silence this sound by pressing the ' * ' key. However, if the trouble occurs again, the beeper will start beeping again.

If you do not wish to hear the beeping sound when a trouble occurs, set Beep On Trouble to No.

The default setting for Beep On Trouble is Yes.

Set up Miscellaneous

To configure Miscellaneous items in the system, from the Set Up menu, press the 6 (MISC) key.

High Security Mode

In High Security Mode, the Master or Manager code is always required to do the following functions:

•Any Control functions

•Any Temperature Control

•View the Event Log

•Access the system from a local phone

With High Security Mode Off, no code is required to access a local telephone.

If your system is set up with High Security Mode On, the display will request the Master or Manager code whenever you select one of these functions, even if the security system is Off. Simply enter your Master or Manager code.

Your system was shipped from the factory with High Security Mode Off, which allows you to view the event log and access the local phones without having to enter a code. In most residential applications, this is appropriate. If you have a commercial installation, or would like added protection from unauthorized access to the system, you may wish to turn on High Security Mode.

Announce Alarms

If the HMS Two-Way Audio Module is being used in a system, this item enables the system to speak the type of alarm and zone over a speaker on premises. When an alarm first occurs, the siren is activated. After a few seconds, the siren is turned off and the type of alarm is announced. The siren is then reactivated.

The default for Announce Alarms is No.

Page 61

Page 68 Page 70
Image 69
Page 68 Page 70
Contents HMS Page Contents Control Telephone Control Page Underwriters Laboratories Requirements Page Underwriters Laboratories UL Listing IntroductionConsole Operation Overall DescriptionDisplay Menus Normal Top-Level DisplayMain Menu Error BeepsTrouble Beeps To silence the beeper, press the * keyCancel HMS 1100 MaintenanceAreas Confirmation BeepSecurity System Operation Disarming the Security System and Silencing AlarmsArming the Security System = OFF= Night DLY Night Delay Using Shortcut Keys= Night = VacationQuick Arm = RestoreBypassing Zones Restoring ZonesWhat Happens When the Alarm is Activated What To Do When You Come HomeBurglar Alarm Activated #=GOTOFire Alarm Activated Gas Alarm ActivatedEmergency Keys Duress Code Entered or Duress Alarm Activated Alarm ResetAlarm Cancel Master Code Trouble IndicationsDuress Code Panic SwitchesArea Arming Manager CodeGoto Area Testing Your System ALC Switch Modules Control CommandsControl ModulesUnit Numbers House CodesScrolling Through Names Controlling Units Dimming and BrighteningLighting Level Timed Commands Ramp CommandScene Command Compose Internal Flags Status of a UnitControlling Outputs All On / OffScenes Leviton Scene ControlButtons HMS Thermostats Temperature ControlIf hold mode is On, Hold is shown Freeze Alarms Temperature AlarmsOutdoor Temperature Temperature Control of AppliancesStatus Through Show Events Tstat Mode Auto FAN AutoClear Text Messages MessagesShow Message MessageLog Message Clear MessageSend Message Pro-Link Phone MessageTelephone Interface Telephone ControlIn-House Phones Remote PhonesPhone Access Denied Remote Lockout Alternate MethodMain Menu Control TemperatureSecurity ButtonWhen the HMS Communicating Thermostat is entered EventsMessage Playing and Recording a Custom Phrase Playing and Recording a MessagePanic Button over the Phone # # # # # # Good-ByeEmergency Dial-Out Digital DialerVoice Dialer How the HMS 1100 Voice Dialer WorksWhat the HMS 1100 Voice Dialer Does PC Access What You Hear If Your HMS 1100 Calls YouEntering the Code Built-In Ethernet Port Connecting to Network via PC AccessController IP Address, Port Number, and Encryption Key HMS 1100 Ethernet ConnectionsDynamic DNS Local NetworkLocal / Wide Area Network Setup Configuration and Advanced Control Programming ACPSet Up Codes Duress Code Set Up TimeAdvanced Control Programming ACP = Add Programs= Show Programs Otherwise, a help screen is displayed = Delete All Programs Edit ProgramsTimes Programs Edit Programs WhenControl Unit Event / ALC Switch Press Event Buttons Security Mode Event ButtonsButton and Event Programs Zone Event Buttons Alarm Event Buttons All On/Off Event ButtonsEvent Buttons Message Event Buttons Pro-Link Miscellaneous Event ButtonsEdit Program Command Program Control CommandsProgram Security Commands Program All On / All Off Commands Program Button CommandsProgram Temperature Commands Program Message CommandsEdit Program Condition Program Security Mode ConditionsProgram Control Conditions Program Zone ConditionsProgram Other Conditions Program Time Clock ConditionsSet Up Dial Dial Out Number Dial Out NumbersDial Order Set Up Arming Entry DelayExit Delay Set up Miscellaneous Format Number Description House Codes 2-16 X-10 All Off Latitude, Longitude, and Time Zone Zone NameDaylight Savings Controller Port Number Controller IP AddressEncryption Key Set Up NamesSet Up Address Set Up VoiceFire Escape Planning Underwriters Laboratories RequirementsFederal Communication Commission Notice If YOU have Trouble with Your Phones Canadian Industry Canada NoticeHMS 1100 Voice Dial-Out Planner Appendix a Dial OUT PlannerPress 9. The system will say Good-bye and hang up Instructions to Called PartyCode Char Appendix B Text Description Character CodesCode Description Appendix C Voice Description CodesFall Online Vault Page Page OnQTechnologies,Inc
Top Page Image Contents