Heat & Glo LifeStyle 6000TRS-CE manual Valve Assembly

Page 6

Service Parts

6000TRS-CE

Valve Assemble Parts List	Beginning Manufacturing Date: Jan 2004
	Ending Manufacturing Date: ______

Valve Assembly

20.1

20.2

20.3

20.4

20.6

20.5

20.7

20.8

20.9

20.10 20.11

IMPORTANT THIS IS DATED INFORMATION: When requesting service or replacement parts for your appliance please provide model number and serial number. All parts listed in this manual may be ordered from an authorized dealer.

ITEM	DESCRIPTION	COMMENTS	PART NUMBER
20.1	Pilot Assembly N		529-550A
20.1	Pilot Assembly P/B		529-551A
	Pilot Assembly P/B		529-551A
20.2	Pilot Bracket		2049-105
	Oriﬁce N (#33C)		582-833
20.3	Oriﬁce P (1.8 MM)		582-818
	Oriﬁce B (#52C)		582-852
20.4	12” Flex		383-302A
20.5	Valve Bracket		2118-104
20.6	Flex Assembly		302-330A
20.7	Piezo Ignitor		291-513
20.8	Wire Assembly		049-552A
20.9	On/ Off Rocker Switch		060-521A
20.10	Valve N		060-524
20.10	Valve P		060-526
	Valve P		060-526
20.11	Male Connector	Pkg of 5	303-315/5

6	Heat & Glo • 6000TRS-CE • 2049-900 Rev. Q • 2/11

Image 6

Contents Model What to do if you smell gasSafety and Warning Information Installing the Fireplace Maintaining and ServicingLog Set Assembly Service PartsService Parts List 6000TRS-CEValve Assembly 6000TRS-CEInstallation Regulations Appliance CertiﬁcationANY Such Action MAY Possibly Cause a Fire Hazard Location Centimeters Fireplace StepLocating Clearance RequirementsStep Framing Fireplace Framing should be constructed of 2 X 4 lumber or heavierStep Installing Flue System Flue System ApprovalsIdentifying Flue Components DVP4 DVP6 DVP12 Straight UP Flue with ONE 1 90o Elbow Flue with TWO 2 90 Elbows Flue with TWO 2 90 Elbows Flue with Three 3 90 Elbows + H Installing Flue Components Venting Out the Rear FlueVenting Out the Top Flue Install Support Brackets On the TOP of the heaterInstall Firestops Installing Support BracketsFlue Pipe & Firestop For Horizontal Terminations using the DVP-TRAP Flue TerminationBe Positioned SO That the Arrow is Pointing UP DVP Termination Cap Outside of the building Alcove Applications Step Positioning Leveling, Securing Fireplace Standing Pilot Ignition SystemStep Gas Supply Line Optional Accessories Step Gas Pressure RequirementsFinishing Installing the Trim Installing the Ceramic ReFractory LOG Placement Heat & Glo 6000TRS-CE 2049-900 Rev. Q 2/11 Glass Assembly Placing the Ember MaterialStep Before Lighting Fireplace Review safety warnings and cautionsDouble-check for faulty components Double-check for gas leaksStep Lighting Fireplace After the Installation Maintaining Servicing Your Fireplace Make Sure the Flames Standing Pilot Troubleshooting With the pilot lit, and the ON/OFF switch Placed in this Opening Limited Lifetime Warranty Limited Lifetime WarrantyWarranty Conditions