Cleaning and
Maintenance
Continued
WARNING:Donotoperatefire- place with glass door unlatched, removed, cracked or broken.
pilot and burners
•Remove material before cleaning burners and replace when cleaning is complete.
•Burner and controls should be cleaned with compressed air to remove dust, dirt or lint.
•Use a vacuum cleaner or small, soft bristled brush to remove excess dust, dirt or lint.
logs
•Use a vacuum cleaner to remove any carbon buildup on logs.
•Replace material periodically as needed. See Replacement Parts.
venting system
Conduct annual inspection of the venting system following these guidelines:
1.Check areas of venting system that are exposed to the weather for corrosion (rust spots or streaks and, in extreme cases, holes). Have these items replaced im- mediately by a qualified service person.
2.Remove the vent cap and shine a flash- light into the vent. Remove any foreign material.
3.Check for evidence of excessive con- densation. Continuous condensation can cause corrosion of caps, pipes and fittings and can be caused by having excessive lateral runs, too many elbows or exterior portions of the system being exposed to cold weather.
4.Inspect joints to verify that no pipe section or fitting has been disturbed and loos- ened. Check mechanical supports such as wall straps for rigidity.
Technical Service
You may have further questions about instal- lation, operation or troubleshooting. If so, contact DESA’s Customer Service Depart- ment at
You can also visit DESA’s technical service web site at www.desatech.com.
Specifications
DVF-36S-N, DVF-36H-N, DVF-36SC-N, DVF-36HC-N
•Rating: 66,000 Btu/hr
•Gas Type: Natural Gas Only
•Ignition: Electronic
•Manifold Pressure: 3.5" w.c.
•Minimum Inlet Supply Pressure: 7.0" w.c.
DVF-36S-P, DVF-36H_P, DVF-36SC-P, DVF-36SH-P
•Rating: 62,000 Btu/hr
•Gas Type: Propane/LP Gas Only
•Ignition: Electronic
•Manifold Pressure: 10.0" w.c.
•Minimum Inlet Supply Pressure: 11.0" w.c.
Replacement Parts
Note: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty.
Parts Under Warranty
Contact authorized retailers of this product. If they can not supply original replacement part(s), call DESA’s Customer Service Depart- ment at
When calling DESA, have ready
•your name
•your address
•model and serial numbers of your fire- place
•how fireplace was malfunctioning
•type of gas used (propane/LP or natural gas)
•purchase date
Usually, we will ask you to return the part to the factory.
Parts Not Under Warranty
Contact authorized retailers of this product.
If they can not supply original replacement
part(s), call DESA at
referral information.
When calling DESA, have ready
•model number of your fireplace
•the replacement part number
Service Hints
When Gas Pressure Is Too Low
•pilot will not stay lit
•burners will have delayed ignition
•fireplace will not produce specified heat
•propane/LP gas supply might be low (pro- pane/LP units only)
You may feel your gas pressure is too low. If so, contact your local gas supplier.
24 | www.desatech.com |