Fireplace Installation
Spring Loaded Pin
Continued
Pin Located on
Middle DoorHook Located
UNLOCK
LOCK
Outer
Door
Hinge
on Inner Door
Middle 
Door
Inner Door
Figure 26 - Removing/Installing Middle Door
Removing and Installing Inner Door Inner door is factory installed.
1.Open outer door. Secure door in open position to avoid accidental breakage.
2.Remove middle door by lifting from hinges (see Figure 26). Set aside to avoid scratches or damage.
3.Remove screws from two side trims (see
Figure 27, page 19).
4.Remove side bricks from top to bottom by prying out of housings(see Figure 27, page 19).
5.Remove bottom bricks, starting with middle section (see Figure 27, page 19).
6.Remove screen and rod (see Figure 27, page 19).
7.While holding inner door, release 6 latches, 3 top and 3 bottom (see Figure 28, page
19).
8.Slowly tilt open glass at a 30° angle and lift up to release glass from bottom retainer
(see Figure 28, page 19).
9.Follow these instructions in reverse to reinstall.
18 | www.desatech.com |