INSTALLATION OF LOGS
1 . Remove front glass. (See "Glass Removal" Section)
2. Remove logs from the packaging.
As with all plastics — these are not toys and should be kept away from children and infants.
3.Place rear log (BH2) on rear bracket (ensure log is seated properly, leveled and centered to the unit), so it will not move from side to side and it is firmly positioned on the bracket.
4.Place front (BH1 on front log support. Use log's bottom holes to locate it.
5.Place top left log (BH3) onto locator notches. Ensure log is secure.
6.Place top right log (BH4) onto locator notches. Ensure log is secure.
BH3BH4
BH2
BH1
Fig. 67
Top logs must be placed properly onto notches.
LAVA ROCK
The lava rock provided with this fireplace must be placed on the firebox base on either side of the burner assembly.
Under no circumstances should this lava rock be placed on any part of the burner assembly.
FLAME ADJUSTMENT
For fireplaces equipped with Hi/Lo valves, flame adjust- ment is accomplished by rotating the Hi/Lo adjustment knob located near the centre of the gas control. Fig. 68/ 69.
LO | HI |
| OFF |
| PILOT |
SIT VALVE | Fig. 68 |
Turn | Turn clockwise | |
counterclockwise | ||
to increase | ||
to decrease | ||
flame height | ||
flame height | ||
| ||
HONEYWELL |
|
VALVE | Fig. 69 |
- 28 -