Empire Comfort Systems VF24FP3-1, VF24FP2-1 Optional Brick Liner Installation Instructions

Page 21

OPTIONAL BRICK LINER INSTALLATION INSTRUCTIONS

EHL-24-1 for Unvented Gas Fireplace

Model

VF24FP2-1, VF24FP3-1

INSTALLING OPTIONAL BRICK LINER EHL-24-1.

1.Remove screen assembly from fireplace.

2.Remove logs from burner assembly.

3.Insert rear brick liner and (2) side brick liners onto bottom of the inner casing. Align grout lines on rear brick liner with grout lines on side brick liners. You must insert rear brick liner before inserting the (2) side brick liners.

4.Loosen top and bottom 10 x 1/2" screws from each side of firebox.

5.Place the (2) liner mounting brackets over the front edges of the (2) side brick liners. Attach liner mounting brackets to outer casing with (4) four 10 x 1/2" screws from Step 4.

6.Replace logs into burner assembly. Refer to "Log Placement," Page 12.

7.Attach screen assembly to fireplace.

8.Installation of optional brick liner is completed.

PARTS LIST FOR EHL-24-1, BRICK LINER KIT

Part Number

Description

11504

Liner Mounting Bracket - Front, 2 Required

R-5769

Brick Liner - Rear

R-5770

Brick Liner - Side Left

R-5771

Brick Liner - Side Right

20248-2-0806

Page 21

Image 21
Contents Installation Instructions Table of Contents Do not Tamper with Pilot Light Safety Important Safety InformationCarbon Monoxide Poisoning MAY Lead to DeathLP-GAS Warning Odor Safety Information for Users of LP-GASIntroduction Water Vapor a BY-PRODUCT of Unvented Room Heaters SpecificationsOutdoors Ventilation Air From Inside BuildingVentilation AIR Ventilation Air From OutdoorsRecommended Gas Pipe Diameter GAS SupplyCombustible Material ClearancesInstallation of Fireplace Into Mantel Installation of TrimInstalling Fireplace in Mantel Built-In Fireplace Installation BUILT-IN Fireplace InstallationRough Opening for Installing in Wall Rough Opening for Installing in CornerPlacement of Glowing Embers Rock Wool LOG PlacementReplacement Loose Material glowing embers Part Number Operation INSTRUCTIONS/FLAME AppearanceWhat to do if YOU Smell GAS VF24FP3-1 Lighting InstructionsLighting Instructions VF24FP2-1 Lighting InstructionsPilot Flame Characteristics VF24FP3-1 PilotVF24FP2-1 Pilot Main Burner and Thermostat Operation Bedroom Installation VF24FP2-1 OnlyVF24FP2-1 VF24FP3-1 Main Burner OperationRemote Receiver Check 750 Millivolt System OperationHeater produces a whistling noise when main burner is lit Gas odor even when control knob is in OFF positionAppliance produces unwanted odors Appliance shuts off during use. Pilot stays onParts List HOW to Order Repair PartsIndex Part Description Number Parts View Optional Brick Liner Installation Instructions Installing Optional Brick Liner EHL-24-1Parts List for EHL-24-1, Brick Liner KIT Installing Optional Blower VFS-BK Optional Blower Installation Instructions20248-2-0806 Optional Blower Installation Instructions Wiring VFS-BK Parts ListOiling Blower Motor VPF24SS Stainless Steel Parts List and Parts View for Optional Trim KitsService Notes