Enviro C-11102, C-11253, 50-1472 owner manual Installer, Consumer, For Your Safety

Page 1

SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED PAPER.

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

Sonnet

B Y : S H E R W O O D I N D U S T R I E S LT D

OWNER’S MANUAL

INSTALLER:

Leave this manual with the appliance.

CONSUMER:

Retain this manual for future reference.

WHAT TO DO IF YOU SMELL GAS

Open windows/extinguish any open flame.

Do not try to light any appliance.

Do not touch any electrical switch or use any phone in your building.

Immediately call your gas supplier from a neighbour’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other appliance.

This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases, unless a certified kit is used.

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. Installation and service must be performed by a qualified installer, service agency or the gas supplier.

Massachusetts installations (Warning): This product must be installed by a licensed plumber or gas fitter when installed within the Commonwealth of Massachusetts. Other Massachusetts code requirements: Flexible connector must not be longer than 36in., a shut off valve must be installed; only direct vent sealed combustion products are approved for bedrooms/bathrooms. A carbon monoxide detector is required in all rooms containing gas fired direct vent appliances. The fireplace damper must be removed or welded in the open position prior to installation of a fireplace insert.

50-1472

Image 1
Contents For Your Safety InstallerConsumer General Safety PrecautionsTable of Contents Vented GAS Fireplace Heater Sonnet BV/DV NG/LPG Codes And ApprovalsDimensions SpecificationsTrimmable Lighting and Turning OFF Instructions Operating InstructionsSetting C/24 hour or F/12 hour Clock Setting the TimeAutomatic Pilot Mode Adjustment of Flame HeightMAN Mode Manual Flame Height Adjustment Changing the Mode of OperationSetting the Temperature Setting the TimerComponent Sound & Reason Remote Control InstructionPilot Flame Maintenance And ServiceReceiver Remote HandsetMethod 1 From Outside the Cabinet Methods for Resetting the ReceiverTo be Installed by a Qualified Service Agency only Conversion Kit Installation Kit Parts ListIs pointing out then the valve is Mantle width and height Initial InstallationQualified Installers only Vent Kit Installation Kit Contents Quantity DescriptionInstall of Intake Air Plug Venting Fireplace Inserts Description Installation of Sonnet DV and BVKIT Components Installation InstructionsVertical Vent Cap Underside Electrical Requirements Removing/Installing Back Panel Fan Kit InstallationGas Line Connection Fan Only ReplacementLabeled Gas Valve To Test Valve PressuresProper Pilot Flame Installation OptionsInstallation Secondary InstallationScrew Hook Bracket To the Trim AssemblyMinimum size of Large Removal InstallationEnsure the Sonnet is turned off and allow the unit to cool Hook PlacementsEmpty firebox showing the ledges for the back logs Third Stage Log Set Installation Never operate the fireplace with the glass door removed Log Set and Ember InstallationProblem Possible Cause Solution Trouble ShootingValve’s Possible Cause SolutionBV only Reference Part Description Part Number Parts ListOption Description Parts ListNumber Parts Diagram Components Parts Diagram Options To the Dealer WarrantyWarranty Warranty Installation Data Sheet