Secondary Installation

OPTIONAL BASE SHELF & RISER:

The Sonnet Base Shelf (15⁄8” (41 mm) high) and Base Shelf Riser (21⁄8” (54 mm) high) are black powder coated components that can be combined to create a riser with an overall height of 23/16” (55 mm). This shelf can be installed with or without the riser and can be used when the hearth in front of the unit is lower than the fireplace opening. Additional Base Shelf Risers can be fastened together to increase the height in increments of 21⁄8” (54 mm). This Base Shelf may be used in conjunction with the Sonnet Colonial & Classic surrounds with or without the Adjustable Surround, and it may also be used with the Sonnet Trimmable Surround. The Base Shelf and Riser are sold separately.

Figure 59: Installing Base Shelf

onto Riser.

Installation:

1.If unit is running, turn it off and allow it to cool completely.

2.When using more than one riser each level must be attached using nine (9) #8 T-20 screws provided (see Figure 58).

3.If installing with riser(s) the Base Shelf is to be fastened to the riser(s) with one T-20 screw at each end of the back (see Figure 59).

Figure 58: Combining 2 Base Shelf

Riser.

4.The leveling legs on the Sonnet may need to be adjusted to match the height of the riser and shelf. Each leveling leg has two (2) screws that can be loosened using a 1⁄4” hex driver (see Figure 31). Adjust the leg to the required height and then retighten the screws.

5.Center the Base Shelf assembly in front of the unit flush with the bottom of the unit.

6.Install surround if required.

INSTALLATION OF ADJUSTABLE SURROUND AND TRIM:

Warning: The surround becomes hot when the unit is operating; ensure that the unit is turned off, and that it has cooled to room temperature.

Kit Contents:

	Colonial or Classic Trim

Quantity	Description

1Trim Set (top, left, right, & bottom)

2Hook Bracket (1 left & 1 right)

4 #8 Screw T-20

	4 for 3 sided	Corner Bracket
	8 for 4 sided	Corner Bracket
	8 for 4 sided

Adjustable Surround

Quantity	Description

2	Surround Corner - Large

2	Surround Corner - Small

16	#8 Screw T-20

4	Mounting Bracket

4	Mounting Bracket Back

1	Keystone & Cover Set

Please ensure that all components are supplied with this kit. If components are missing or have been damaged, contact your dealer, distributor or courier company before starting this installation.