Initial Installation
QUALIFIED INSTALLERS ONLY
ELECTRICAL REQUIREMENTS:
The fan will not operate if the appliance is cold. A few minutes after the appliance is lit and the fan is set to low or high, the fan will automatically turn on. The fan will automatically turn off after the appliance has cooled down.
|
| 120oF (49oC) |
| |
Fan Control | Temperature Sensor |
| ||
|
|
| ||
Low | High |
|
|
|
CNT6 | CNT8 | CNT3 | CNT2 |
|
Black |
| Black | ||
| CNT7 |
|
| |
|
|
|
| |
|
|
| CNT9 |
|
| Grey |
|
| Black |
| Grey |
| White |
|
|
|
| Green | Power Cord |
|
|
| 120V AC | |
|
| CNT5 |
|
|
| CNT4 | CNT1 |
|
|
|
| FAN |
|
|
Figure 44: Fan wiring diagram.
The fireplace must be electrically connected and grounded in accordance with local codes or, in the absence of local codes, with the current CSA C22.1 Canadian Electrical Code Part 1, Safety Standards For Electrical Installations, or The National Electrical Code ANSI / NFPA 70 in the US.
WARNING: The electrical grounding instructions must be followed. The fan kit is equipped with a
CAUTION: When servicing controls, label all wires prior to disconnection. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.
Figure 45: Wiring of a valve.
25