INSTALLATION
STANDARD
FLUSH DOOR
The standard flush door comes with a black frame. To install the frame, simply hook the top door flange onto the top of the unit and swing the door towards the unit, diagram 1. Be careful that the glass gasket does not roll up; there must be a gap between the gasket and the door lip to ensure that the door sits securely on the unit. Diagram 2.
Use the hook to pull the spring out until you can put the hook into the slot on the bottom door bracket. Repeat for 2nd spring. See diagram 3.
To remove the flush door, reverse the above steps.
IMPORTANT NOTE: The chain must rest on TOP of the gas inlet pipe never under it.
Diagram 3
Diagram 1a
Diagram 1b
Diagram 2
18 |