Regency U32-LP4, U32-NG4 Kensington Panel Door Installation, Glass Door Sub-Frame Hook

INSTALLATION

THE KENSINGTON®

2-PANEL DOOR INSTALLATION

1)Install the Sub-Frame by hooking the top fl ange onto the top of the Glass Door and swing the Sub-Frame towards the unit. Pull out the hooks which already secure the Glass Door and place them thru the holes in the bottom of the Sub-Frame to secure both the Glass Door and Sub-Frame in place together.

3)Hook the Left Side Screen Door to the Door Frame by placing the door hinges (top & bottom) over the pins on the Door Frame. Repeat for Right Side Screen Door.

Note: It will be easier to put the Screen Door in place by starting with the bottom hinge.

Glass Door

Sub-Frame

Sub-Frame

Hook

2)Mount the 2-panel Door Frame to the fl ange on Sub-Frame, ensuring to line up holes. Secure using the 6 screws provided.

Left Side Door Pin on Door Frame

Note: If you fi nd that the Left or Right Side Screen Door is lower then the other, use the spacer provided to help align the Doors.

The spacer is to be placed over the bottom pin before installing the Screen Door.

Spacer

22 U32-4 FPI Direct Vent Gas Insert