Pentax N-0751M-OD installation manual Prohibited Be sure to do

Page 6

CAUTION

Consult with the customer concerning the location of installation.

Do not install the water heater where the exhaust will blow on outer walls or material not resistant to heat. Also consider the surrounding trees and animals.

The heat and moisture from the water heater may cause discoloration of walls and resinous materials, or corrosion of aluminum materials.

Install in a location where the exhaust gas flow will not be affected by fans or range hoods.

• Take care that noise and exhaust gas will not affect neighbors.

• Before installing, make sure that the vent termination (or the vent

 

cap in an outdoor installation) will have the proper clearances

Prohibited

according to the National Fuel Gas Code (ANSI Z223.1).

 

[For outdoor installation only]

• Install the water heater in a location where it is free from obstacles and stagnant air.

Do not install the water heater near staircases or emergency exits.

Do not locate the vent termination directed towards a window or any other structure which has glass or wired glass facing the termination.

Avoid installation where the unit will be exposed to excessive winds.

[For indoor installation only]

Avoid installation above gas ranges or stoves.

Avoid installation between the kitchen fan and stove.

If oily fumes or a large amount of steam are present in the installation location, take measures to prevent the fumes and steam from entering in the equipment.

[For N-0751M only]

Make sure that the location allows installation of the exhaust vent as specified.

For outdoor installation, use the outdoor vent cap.

If it is necessary to vent above the roof line in an outdoor installation, also use the base of the vent cap for rain protection.

Prohibited

Be sure to do

State of California: The water heater must be braced, anchored or strapped to avoid moving during an

earthquake. Contact local utilities for code requirements in your area or call: 1-800-456-9805 and request instructions.

6

Image 6
Contents Installation Manual CanadaEach See p Remote Controller Outdoor Junction BoxPart Shape Part Shape Outdoor Vent Cap VC4-1Controller to only one System DiagramTypical Plumbing UnitsBefore Installation Choosing Installation Site With corrugatedProhibited Be sure to do Installation Clearances Min 75mm 200mm Or Min 75mm 3 more600mm 24 or more Maintain the following clearance from both combustible When installing the unit on a balcony, etc., secure anSuch as the wall of the second floor where the unit is out Non-combustible materialsVent Terminal 9m 3 above any forced air inlet within Window, or gravity air inlet into any buildingFor N-0751M- OD Installation Be damaged and may become highly dangerousLocating Screw Holes Mounting Vent Piping ClearancesAppliance Adapters Horizontal Vent Termination Vertical Vent TerminationCombustion Air Openings supplying indoor airMeasuring Gas Pressure Gas Meter Gas PipingGas Pressure Gas ConnectionGas Line Sizing for a Noritz Gas Water Heater Supply water piping Drain pipingHot water piping Plumbing Applications For Space Heating PurposesElectrical Wiring Breaker InstallationGround Remote Controller Remove the front cover of the water heater 4 screwsHeard 2 sec. and 50 C 122 F appears on the display Connecting Remote Controller Cord to Unit Remote controller cordRelay connection with larger pumps 85 W Connecting the pump control wireWire Tag Pump ControlWiring Throughway Coupling Cord Remote controller can be connected to eitherConnecting the Quick Connect Cord to the two units Unit a or BMaintenance Periodically check the following to ensure properOperation of the water heater Handling after trial operation Lighting InstructionsShutdown Instructions Dimensions 0751M0751M-OD Connection of Remote Controller Cord For InstallersIncluded Parts List White ConnectorInstallation Remote Controller Cord Rear SideController cord outside the junction box Box NutTie the redundant length of the remote Close the junction boxNatural Gas and Propane Installation Code Nscngpic Pas évitée, entraînera des blessures graves ou mortellesProduits Être nécessaires à l’installation Pièce Forme Commencer l’installation Pièce FormeVoir p.21 Ce document Cordon de Télécommande Boîte de dérivation Extérieure de la TélécommandePlomberie type Télécommande à Un seul des AppareilsSchéma du système Remarque Raccordez laVérifiez le gaz Avant l’installationCheck-up Vérifiez la qualité de l’alimentation en eauChoix du site d’installation Interdit Veillez à ’exécuter Dégagement pour linstallation De calorifugeage matière incombustible autre que le Indique la distance lors de linstallation dune plaqueLorsque vous installez lunité sur un balcon, etc., laissez Métal, dune épaisseur de 2.5mm 0.1 ou plus ouEntrée d’alimentati on en air 2m 4 dessous, 1.2m Maintenez les dégagements suivants parRapport aux ouvertures d’un bâtiment Horizontalement à partir de, ou 0.3mInstallation dun boîtier encastré avec Encastr 3m 1 dessous, 0.3mCache déposé Fixation au mur Dégagement Installation du tuyau d’évent uniquementTuyauterie de l’évent Adaptateurs d’appareilBouche de l’évent horizontal Bouche de l’évent verticalAir comburant Ouvertures alimentant en air intérieurPression du gaz Mesure de la pression du gaz Compteur à gazRaccordement de gaz Adapté de UC1997 Conduite d’eau Plomberie Pour le chauffage du bâtimentAdressez-vous à un électricien Qualifié pour l’installation électriqueInstallation du disjoncteur TerreTélécommande Coupez lalimentation électrique du chauffe-eauRaccordement du cordon de télécommande à l’unité Cordon de télécommandeAttache Câble 18AWG Raccordement du câble de commande de la pompe Connexion par relais avec de grandes pompes 85WBranchement du cordon de raccordement rapide aux deux unités Connecteur Attache Ouverture pour Cordon de Câbles CouplageVérifiez régulièrement les points suivants pour Garantir un bon fonctionnement du chauffe-eauManipulation après le test de fonctionnement Instructions d’allumageInstructions d’arrêt 10mm Nom des pièces Quantité Télécommande Garniture du mur Pour les installateursRemarques sur l’emplacement d’installation RemarqueInstallation La boîte Attachez le cordon de la télécommandeÉcrou de Qui dépasse à l’extérieur de la boîte de

N-0751M-OD, N-0751M specifications

The Pentax N-0751M and N-0751M-OD are advanced digital cameras designed primarily for outdoor and rugged environments. These models exemplify the blend of functionality and durability that Pentax is known for, appealing to both photography enthusiasts and professionals who require reliable equipment in demanding conditions.

One of the standout features of the N-0751M and its counterpart, the N-0751M-OD, is their robust construction. Built to withstand harsh environments, these cameras are weather-resistant, ensuring that they can handle rain, dust, and extreme temperatures. This makes them ideal for nature photographers, adventure enthusiasts, and even those who work in challenging conditions.

The N-0751M series is equipped with a high-resolution sensor that captures stunning images with remarkable clarity and detail. The camera features an advanced image processing engine that enhances color accuracy and dynamic range, allowing users to create vibrant and lifelike photos. This sensor also performs exceptionally well in low-light environments, making it versatile for various shooting situations.

Another key characteristic of the N-0751M and N-0751M-OD is their fast and responsive autofocus system. This ensures that users can quickly lock onto their subjects, which is critical for capturing fleeting moments, whether in wildlife photography or action sports. The cameras also come with multiple autofocus modes and options, providing photographers with the flexibility to choose the best setting for their shooting style.

In terms of usability, the N-0751M series features an intuitive interface with customizable settings that allow users to adapt the camera to their personal preferences. The ergonomic design promotes comfort during extended shooting sessions, making it easy to navigate through menus and settings quickly.

For connectivity, the N-0751M and N-0751M-OD come equipped with Wi-Fi capabilities, facilitating easy sharing and remote control through a smartphone app. This enables photographers to transfer images wirelessly and control the camera from a distance, enhancing the shooting experience.

In summary, the Pentax N-0751M and N-0751M-OD embody the perfect combination of durability, image quality, and user-friendly technology. With robust features that cater to professional demands, these cameras stand out as reliable tools for capturing stunning images in any environment. Whether for work or passion, photographers can count on the N-0751M series to deliver superior performance and exceptional results.